Filter
Top Products
180
— Settings for drum Programs —
If a drum Program (“Oscillator Mode” Drums) is selected
for timbres in Combination mode and for tracks in
Sequencer mode and Song Play mode, you can select DKit
for “BUS Select.” If you select DKit, the “BUS Select” (Global
P5: 5–2b) settings for each key become effective, and each
drum instrument sound will be routed to the corresponding
buses (e.g.: the snare sound is sent to IFX1, kick sound to
IFX2, and other sounds to L/MON and R). If you select any-
thing other than DKit, you may apply any Insert Effects to
all drum instruments, regardless of the DrumKit settings.
If you have selected DKit for “BUS Select,” you can select
“DrumKit IFX Patch” (Combination P8: 8–1C) from the page
menu. This option allows you to change the routing of the
Insert Effects temporarily by changing “BUS Select” for each
key. For example, assume that the DrumKit key assignment
is set so that a snare sound is routed to IFX1 and a kick sound
is routed to IFX2. In this case, if you wish to assign IFX 1 and
2 to the Programs used by other timbres and tracks, you can
view the routing so that these DrumKit sounds are routed to
IFX3 and IFX4 respectively. This type of patching is available
only with the keys for which “BUS Select” (Global P5: 5–2b)
is set to IFX1–5. You can check the settings with the Routing
map. After you set “DrumKit IFX Patch,” press the OK but-
ton to confirm the setting. If you wish to restore the original
DrumKit setting, set IFX1 to IFX1, IFX2 to IFX2, IFX3 to IFX3,
IFX4 to IFX4, and IFX5 to IFX5.
In the following example, Drum Program is assigned to Tim-
bre 1, and normal Programs are assigned to Timbres 2 and 3.
“BUS Select” is set to DKit for Timbre 1, IFX1 for Timbre 2,
and IFX2 for Timbre 3. With Timbre 1, the “BUS Select” (Glo-
bal P5: 5–2b) for DrumKit setting becomes effective.
For example, assume that the snare sound is routed to IFX1,
and the kick sound is routed to IFX2, and you wish to use an
effect for a drum Program that is different from the effects
for timbres 2 and 3. In this case, use “DrumKit IFX Patch.”
Select “DrumKit IFX Patch” from the page menu to tempo-
rarily change the setting for the DrumKit from IFX1 to IFX3,
and IFX2 to IFX4. When you confirm the setting, the snare
sound will be routed to IFX3 and the kick sound will be
routed to IFX4.
DrumKit IFX Patch dialog
After setting the parameters
2–3. Sampling mode
The external input sounds from the AUDIO INPUT 1, 2, S/P
DIF IN, and mLAN (if the EXB-mLAN is installed) jacks can
be processed by the insert effects and sampled. You can also
apply insert effects to the samples assigned to a multisam-
ple, and resample the result. In addition, an audio CD
inserted in the CDRW-1 option can be played back, or pro-
cessed by insert effects and sampled.
If you want to apply insert effects to an external sound and
sample it, use “BUS Select” (Sampling P0: 0–2a) to set the
bus for Input1 and 2. Settings for the input sound from the
CDRW-1 are made by “Input” Analog, in the same way as
for the external input sound from AUDIO INPUT 1 and 2. If
you want to apply an insert effect to a sample and resample
it, make settings for “BUS Select” (Sampling P8: 8–1b).
In the respective “BUS Select,” specify the Input1 and 2 bus.
You can choose from L/R, IFX1–5, 1–4, 1/2, 3/4, and Off.
In the example shown in the diagram below, the external
input sound from Input1 and 2 is sent to IFX1. As in other
modes, you can make insert effect settings in P8: Insert
Effect, and apply the insert effect to the external input sound
and sample the result.
Here is an example of bus settings for applying IFX1 to the
samples assigned to a multisample, and resampling the
result.
When you resample, L/R will automatically be selected
as the “BUS (IFX) Select” setting. Please be aware of
this if you continue sampling.
For details on any of these sampling methods, refer to BG
p.39, 101.
2–4. Audio Input
In Program, Combination, Sequencer, Song Play, and Disk
modes, you can apply the insert effects, master effects, and
master EQ to the external input sounds from the AUDIO
INPUT 1, 2, S/P DIF IN, and mLAN (if the EXB-mLAN
option is installed). The external input sounds will be routed
from these jacks to the effect(s) as specified by the “Input
(COMBI, PROG, SEQ, S.PLAY, DISK)” (Global P0: 0–3a) set-
tings.
In Disk mode, an inserted audio CD can be played back if
the CDRW-1 option is installed. The input sound from the
CDRW-1 is specified by “Input” Analog in the same way as
for the external input sound from AUDIO INPUT 1 and 2.