Filter
Top Products
Effect
235
b: L/R Pitch
When you select Up/Down for this parameter, the pitch shift
amount for the right channel will be reversed. If the pitch shift
amount is positive, the pitch of the left channel is raised, and the
pitch of the right channel is lowered.
096: Rotary Speaker OD
(Rotary Speaker Overdrive)
This is a stereo rotary speaker effect. It has an internal speaker
simulator that simulates overdrive (recreating the amp distor-
tion) and characteristics of the rotary speaker, producing a
very realistic rotary speaker sound.
a: Sw
This parameter determines how to switch on/off the overdrive
via a modulation source.
When “Sw” = Toggle, overdrive is turned on/off each time the
pedal or joystick is operated.
Overdrive will be switched on/off each time the value of
the modulation source exceeds 64.
When “Sw” = Moment, overdrive is applied only when you press
the pedal or operate the joystick.
Only when the value for the modulation source is 64 or
higher, the overdrive effect is applied.
h
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level
☞ Fx:037,
Src
Selects the modulation source for the input level
Off...Tempo
☞ Fx:037
i
Spread –100...+100
Sets the width of the stereo image of the effect sound
☞ Fx:043
j
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
–100...+100
a
Overdrive
Switches overdrive on/off.
Off, On
Src Off...Tempo
Selects the modulation source that switches overdrive on/off
Sw Toggle, Moment
Selects the switching mode of the modulation source that switches
overdrive on/off
☞
b
Overdrive Gain
Determines the degree of distortion
0...100
Overdrive Level
Sets the overdrive output level
0...100
c
Overdrive Tone
Sets the tonal quality of overdrive
0...15
Speaker Simulator
Switches speaker simulation on/off
Off, On
d
Mode Switch
Switches between speaker rotation and stop
Rotate, Stop
Src Off...Tempo
Selects the modulation source that toggles between rotation and
stop
Sw Toggle, Moment
Selects the switching mode of the modulation source that toggles
between rotation and stop
☞ Fx:040
e
Speed Switch Slow, Fast
Switches the speaker rotation speed between slow and fast.
Src Off...Tempo
Selects the modulation source that toggles between slow and fast
Sw Toggle, Moment
Selects the switching mode of the modulation source that toggles
between slow and fast
☞ Fx:040
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Mic Distance
Mic Spread
Horn/Rotor
Balance
D
-mod
D
-mod
D
-mod
D
-mod
Mode Switch: Rotate/Stop
Speed Switch: Slow/Fast
Manual Speed Control
On/Off
Speaker Simulation
Overdrive
Horn
Rotary Speaker
Rotor
+
f
Horn/Rotor Balance Rotor, 1...99, Horn
Sets the volume level balance between the high-range horn and low-
range rotor
ManualSpeedCtrl Off...Tempo
Sets the modulation source in case the rotation speed is changed
directly
☞ Fx:040,
g
Horn Acceleration 0...100
How quickly the horn rotation speed in the high range is switched
☞ Fx:040
Horn Ratio Stop, 0.50...2.00
Adjusts the (high-range side) horn rotation speed. Standard value is
1.00. Selecting “Stop” will stop the rotation
h
Rotor Acceleration 0...100
Determines how quickly the rotor rotation speed in the low range is
switched
☞ Fx:040
Rotor Ratio Stop, 0.50...2.00
Adjusts the (low-range side) rotor rotation speed. Standard value is
1.0. Selecting “Stop” will stop the rotation
i
Mic Distance 0...100
Distance between the microphone and rotary speaker
☞ Fx:040
Mic Spread
Angle of left and right microphones
0...100
☞ Fx:040
j
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
–100...+100