Filter
Top Products
Combination
P0
P1 P2 P3 P4 P7 P8 P9
33
2. Combination mode
In this display page you can select and play Combinations.
A Combi allows you to use up to eight programs at once.
0–1: Prog. Select (Program Select)
0–1a: Bank, Combination Select, 10’s Hold,
Category,
Bank (Bank Select)[Bank INT-A…INT-E, EXB-A...EXB-G]
This is the Combination bank display.
Press one of the BANK [INT-A]–[EXB-G] keys to select a
bank.
Each of the rewritable banks INT-A–INT-E and EXB-A–
EXB-G contain 128 (a total of 1,536) combination program
areas.
If you have selected the “Bank/Program (Program
Select)” (0–1d) edit cell for a timbre 1–8 in the Prog.
Select page, BANK [INT-A]–[EXB-G] will switch the
program banks for timbres 1–8.
Combination Select [0…127]
Here you can select the desired combination. When this
parameter is selected, you can select combinations using the
numeric keys [0]–[9], [VALUE] dial, or [ ], [ ] keys.
When you press the popup button, the Bank/Combination
Select menu will appear. Here you can select combinations
by bank.
You can select combinations by transmitting MIDI pro-
gram changes from a connected external MIDI device,
or by using a foot switch. (“Foot SW Assign” Global P2:
2–1a, “Foot Switch Assign List” ☞p.251)
Bank/Combination Select menu:
1 Press the popup button located at the left of “Combina-
tion Select” to access the Bank/Combination Select
menu.
2 Press one of the tabs located at the left or right to select a
bank.
3 Select a combination from the list. You can directly press
your choice within the list, or use the [] [] keys.
4 Press the OK button to execute, or press the Cancel but-
ton to cancel your selection.
Category [00...15]
Select the combination category.
Each combination is assigned to one of 16 categories. You
can choose a category, and select from the combinations
included in that category. When you press the popup menu
button, the Category/Combination Select menu will appear.
Category/Combination Select menu:
1 Press the (category) popup button located at the top of
“Combination Select” to access the Category/Combina-
tion Select menu.
2 Press one of the tabs at left or right to select a category.
3 Select a combination from the list. You can directly press
your choice within the list, or use the [] [] keys.
4 Press the OK button to execute, or press the Cancel but-
ton to cancel your selection.
The category of each combination can be specified in the
“Write Combination” (0–1A) dialog box.
10’s Hold
1 Press the [./10’s HOLD] key to display .
The 10’s place of the combination number will be held
(fixed).
2 Press any numeric key [0]–[9] to input the 1’s place of the
combination number with a single keystroke.
3 You can use the [ ], [ ] keys to change the value of
the 10’s place.
4 To cancel, press the [./10’s HOLD] key to turn off the
display.
(Tempo) [040...240, EXT]
This sets the tempo of the arpeggiator. The tempo can also
be adjusted by the ARPEGGIATOR [TEMPO] knob. A dis-
play of EXT indicates that the “MIDI Clock” setting (Global
P1: 1–1a) has been set to External MIDI or External mLAN,
and that the arpeggiator will synchronize to MIDI Clock
messages received from an external MIDI device.
Combination P0: Play
INT-A...INT-D Preloaded combinations
INT-E User combinations, EXB-MOSS combinations
EXB-A...EXB-G User combinations, EXB-PCM series combina-
tions
0–1
0–1a
0–1b
0–1c