Filter
Top Products
Teledyne API – Model T700 Dynamic Dilution Calibrator Overview of Operating Modes and Basic Operation
121
Note
It is generally a good idea to end each calibration sequence with a
PURGE
instruction followed by an instruction to return the instrument to STANDBY
mode.
Even if a
PURGE is not included, the last instruction in a sequence should
always
be to place the T700 in STANDBY mode.
To create a sequence, use the instructions in the following sections to name the
sequence, set its associated parameters and define the steps to be included.
4.3.1.1. Activating a Sequence from the T700 Front Panel
To activate an already programmed sequence from the front panel, press:
06873B DCN6388