Filter
Top Products
T700, M700E Calibrator Manuals APPENDIX A-2: Setup Variables For Serial I/O, Revision D.3 (05623D DCN5839)
A-17
Setup Variable Numeric
Units
Default
Value
Value
Range
Description
RS232_MODE2 — 0 0–65535 RS-232 COM2 mode flags.
(Same settings as
RS232_MODE, plus these when
MODBUS option is installed:)
8192 = enable dedicated
MODBUS ASCII protocol
16384 = enable dedicated
MODBUS RTU or TCP protocol
BAUD_RATE2 — 19200 300,
1200,
2400,
4800,
9600,
19200,
38400,
57600,
115200
RS-232 COM2 baud rate.
MODEM_INIT2 —
“AT Y0 &D0
&H0 &I0 S0=2
&B0 &N6 &M0
E0 Q1 &W0”
0
Any character
in the allowed
character set.
Up to 100
characters
long.
RS-232 COM2 modem
initialization string. Sent verbatim
plus carriage return to modem on
power up or manually.
RS232_PASS Password 940331 0–999999 RS-232 log on password.
LINE_DELAY
1
ms. 0 0–1000
RS-232 inter-line transmit delay
(0=disabled).
MACHINE_ID ID 700 0–9999 Unique ID number for instrument.
COMMAND_PROMPT — “Cmd> ”
Any character
in the allowed
character set.
Up to 100
characters
long.
RS-232 interface command
prompt. Displayed only if enabled
with RS232_MODE variable.
Enclose value in double quotes
(") when setting from the RS-232
interface.
06873B DCN6388