Filter
Top Products
Introduction Teledyne API – Model T700 Dynamic Dilution Calibrator
24
Software linearization of Mass Flow Controllers (MFC)
4 calibration gas ports configurable for single or multi-blend gases
Optional 3
rd
MFC for wide dynamic range
Optional gas phase titration chamber
Optional zone generator and photometer to allow use as primary or transfer
standard
Inlets for external ozone reference sources
1.3. OPTIONS
The options available for your analyzer are present in with name, option number, a
description and/or comments, and if applicable, cross-references to technical details in this
manual, such as setup and calibration. To order these options or to learn more about them,
please contact the Sales Department of Teledyne Advanced Pollution Instruments at:
TOLL-FREE: 800-324-5190
PHONE: +1 858-657-9800
FAX: +1 858-657-9816
EMAIL: apisales@teledyne.com
WEBSITE: http://www.teledyne-api.com/
Table 1-1: Analyzer Options
Option
Option
Number
Description/Notes Reference
Flow Options For mass flow control (MFC)
7A
Source MFC 0-50 CC/MIN (Replaces 0-100 CC/MIN)
7B
Source MFC 0-200 CC/MIN (Replaces 0-100 CC/MIN)
8A
Diluent MFC 0-5 SLPM (Replaces 0-10 SLPM)
8B
Diluent MFC 0-20 SLPM (Replaces 0-10 SLPM)
9
Third MFC (Can only be on source)
Section 3.3.2.6
Calibration Options Gas generators
1A
Internal Ozone (O
3
) Generator with
Optical Feedback and GPT Mixing Chamber
Section 3.3.2.6
2A
UV Photometer Module (to increase accuracy of O
3
Generator, Option 1A)
Section 3.3.2.6
5
Permeation Tube Oven
Section 3.3.3
73
Dual Gas Output (NOy – special)
Section 3.3.4
Figure 3-28
Rack Mounting For mounting the analyzer in standard 19” racks
20A Rack mount brackets with 26 in. (660 mm) chassis slides N/A
20B Rack mount brackets with 24 in. (610 mm) chassis slides N/A
21 Rack mount brackets only N/A
06873B DCN6388