Filter
Top Products
Teledyne API – Model T700 Dynamic Dilution Calibrator Overview of Operating Modes and Basic Operation
149
NO. VARIABLE DESCRIPTION
ALLOWED
VALUES
DEFAULT
VALUES
3
O3_PHOTO_BENCH_ONLY
2
O
3
bench control flag.
ON turns on the photometer pump and
switches measure/reference valve only
when the O
3
mode is set for BNCH (See
Section 3.4.8).
ON/OFF OFF
4
STD_TEMP
1
Sets the standard Temperature used in
calculating O
3
flow rates and concentrations.
0ºC and 100ºC 25ºC
5
STD PRESSURE
1
Sets the standard pressure used in
calculating O
3
flow rates and concentrations.
15.00 – 50 .00
in-Hg-A
29.92 in-Hg-A
6
CLOCK_ADJ
Adjusts the speed of the analyzer’s clock.
Choose the + sign if the clock is too slow,
choose the - sign if the clock is too fast (See
Section 4.5).
-60 to +60 s/da
y
Default=0
0
1
DO NOT ADJUST OR CHANGE these values unless instructed to by Teledyne API’s customer service personnel.
2
Only available in calibrators with O
3
photometer and generator options installed.
IMPORTANT
IMPACT ON READINGS OR DATA
There is a 2-second latency period between when a VARS value is
changed and the new value is stored into the analyzer’s memory. DO NOT
turn the analyzer off during this period or the new setting will be lost.
06873B DCN6388