Filter
Top Products
Overview of Operating Modes and Basic Operation Teledyne API – Model T700 Dynamic Dilution Calibrator
130
4.3.1.7. Setting the PROGRESS Reporting Mode for the Sequences
As sequences run, the T700 calibrator reports progress by displaying a message in the
MODE field of the front panel display (See Figure 3-1). There are several types of
report modes
available (see Table 4-10).
Table 4-10: Sequence Progress Reporting Mode
MODE
DESCRIPTION
STEP
Shows the progress as the sequence name and step number. This is the traditional display.
Example: Progress for a sequence named “SO2_Test” would appear as “SO2_Test-2”,
indicating that it is currently executing step 2.
PCT
Shows the progress as a percent (0–100%) of each duration step.
Example: “SEQ 48%”
ELAP
Shows the progress as time elapsed in hours, minutes and seconds, counting upward from 0.
Example: “T+01:30:25” (i.e. 1 hour, 30 minutes, 25 seconds have elapsed)
REM
Shows the progress as time remaining in hours, minutes, and seconds remaining, counting
downward to 0.
Example: “T-01:30:25” (i.e. 1 hour, 30 minutes, 25 seconds are remaining)
To select a PROGRESS report mode, press:
06873B DCN6388