Filter
Top Products
MIDI recording Other ways to record
95
Using KARMA for pattern recording
If the KARMA function is set to operate for the track
that is selected for “Track Select,” and record the
performance of the KARMA function into the pattern.
Other ways to record
Multi-track recording with KARMA
You can record multi-track performances generated by
KARMA. For more information, see “KARMA
function settings in Sequencer mode” on page 210.
Multi-track recording with RPPR
You can record multi-track performances generated by
RPPR. For more information, see “Using RPPR
(Realtime Pattern Play/Record)” on page 112.
Using the control surface to record
changes in the pan, EQ, volume, or Tone
Adjust parameters of a MIDI track
During realtime recording, you can use the control
surface to control the pan, EQ, volume, or Tone Adjust
parameters, and record these changes so that they will
be reproduced during playback.
If you will be adjusting more than one track
simultaneously, you’ll need to use multi-track
recording.
Note: Changes you make using the control surface are
transmitted as control changes or system exclusive
messages. In order to record these changes, the Global
P1: MIDI– MIDI “Enable Control Change” and “Enable
Exclusive” items must be checked. Move to Global
mode and make sure that these items are checked.
Channel after touch 00 (zero)
Pitch bender 00 (zero)
Controller Reset value