Filter
Top Products
Appendices
218
Are the bank/numbers of the programs used by the
combination the same as when the combination was
created?
• If you have switched program banks, you can use
the Change all bank references menu command to
change the program bank for each timbre of a
combination. For more information, see “Change all
bank references” on page 682 of the Parameter
Guide.
Can’t write a Program
You can’t write HD-1 programs into bank INT-F.
Conversely, you can’t write EXi programs into banks
USER-A–E. However for banks USER-A–G, you can
use the Global mode page menu command Set
Program User-Bank Type to change the type of each
bank, so that it will accommodate the desired type of
programs. With the factory settings, bank USER-F is
for EXi programs, and the remaining banks are for HD-
1 programs. For more information, see “Set Program
User-Bank Type” on page 682 of the Parameter Guide.
Songs
Song does not play correctly after being
loaded
In the dialog box when you saved the data, did you
check all of the items that you wanted to save?
Are the programs used by the song the same as when
the song was created?
• If you have switched program banks, you can use
the page menu command Change all bank
references to change the program bank for each
track of a song. For more information, see “Change
all bank references” on page 682 of the Parameter
Guide.
• When saving the song, it is best to use Save All or
Save PCG & SEQ so that the programs are saved
together with the song. Then when loading, load
both the .PCG and the .SEQ data.
Have you loaded the multisamples and samples used
by the program?
Audio tracks don’t play
The audio files for the Song must be stored within a
directory at the same directory level as the .SNG file,
and that directory must be named with the first six
characters of the .SNG file name, followed by “_A.”
For instance, if the .SNG file is named
WAMOZART.SNG, its audio folder must be named
WAMOZA_A. If you move or rename the .SNG file,
make sure to move or rename the main audio folder as
well.
If the folder containing the WAVE files for the song you
loaded has the wrong name, the icon is shown in gray.
Could you have moved or renamed the folder?
Playback does not start when you press
the SEQUENCER START/STOP switch in
Sequencer mode
Is the MIDI Clock (Global P1: MIDI) set to Internal or
Auto?
Can’t record in Sequencer mode
Did you use Track Select to select the MIDI track or
audio track that you want to record?
Is the Memory Protect Song check box (Global P0)
unchecked?
Is the MIDI Clock (Global P1: MIDI) set to Internal or
Auto?
EXi programs don’t play correctly in a
Song.
Does the Track’s number have a gray background
color, instead of blue? And, does [Inactive] appear after
the Program name in the Selected Track Info?
• The Programs in the Song are asking for more than
the maximum available EXi fixed resources.
Remove one or more of the EXi Programs which
uses fixed resources.
For more information, see “CX-3 & STR-1:
Limitations on EXi fixed resources” on page 326 of
the Parameter Guide.
A combination copied using “Copy From
Combi” doesn’t record via KARMA as it
did when you were playing it in
Combination mode
Is Multi REC (Sequencer P0: Play/REC) checked?
Are the settings in the Copy From Combination dialog
box correct?
• In the Copy From Combination dialog box, check
the Multi REC standby option before you execute
the copy. This will cause the settings to be adjusted
automatically.
Can’t record your performance using Tone
Adjust
Changes you make using Tone Adjust are recorded as
system exclusive data. Did you check the Global mode
MIDI Filter Enable Exclusive check box?
RPPR does not start
Is the Sequencer P0: Play/REC RPPR setting checked?
(See “Using RPPR (Realtime Pattern Play/Record)” on
page 112.)