Filter
Top Products
134
NoiseReduction
On the desired track, specify a region (IN–OUT) containing
only noise which the D3200 will use to analyze and “learn”
the noise component. This noise component will then be
eliminated from the data in the other region you specify (TO–
END) of the same track.
A1. Destination
[1...32, ML, MR, 1-2...31-32, MST, 1-4...29-32,
1-8...24-32, 1-16, 17-32, 1-32, ALL]
Select the track on which noise reduction will be per-
formed.
For a 48 kHz/24-bit or 44.1 kHz/24-bit song, you can select
only tracks 1–16.
A2. WAVE
This displays the waveform of the track audio, allowing
you to set the editing locations (IN, OUT, TO, END) more
accurately. (→p.128 Edit Type: “CopyTrk,” Wave dialog
box)
ErasePunchNoise
This minimizes “pop” noises. Set the IN and OUT locations
before and after the area where the noise occurs. You can also
erase multiple occurrences of noise.
The “ErasePunchNoise Sens” value specifies the sensitivity
at which noise will be detected. Normally, you should start
by executing this command with a setting of “1”. Increase the
setting if noise still remains.
A1. Destination
[1...32, ML, MR, 1-2...31-32, MST, 1-4...29-32,
1-8...24-32, 1-16, 17-32, 1-32, ALL]
Select the track from which punch noise will be erased.
For a 48 kHz/24-bit or 44.1 kHz/24-bit song, you can select
only tracks 1–16.
A2. WAVE
This displays the waveform of the track audio, allowing
you to set the editing locations (IN, OUT) more accu-
rately. (→p.128 Edit Type: “CopyTrk,” Wave dialog box)
A3. Mode [0 dB...–63.5 dB]
Click the button to open the ErasePunchNoise Mode dia-
log box, and use “ErasePunchNoise Sens” to specify the
sensitivity at which noise will be detected.
Click the OK button (or press the panel YES key) to spec-
ify the sensitivity, or click the Cancel button (or press the
panel NO key) to cancel the setting.
A2
A1
IN
OUT
TO
END
After execution
The region from which you want
to remove noise (Destination)
Before execution
A region of only noise
(Learn Noise)
A3
A1
A2
IN OUT
Before
execution
After
execution