Filter
Top Products
37
Operation
Song,
Locate
MixerEffects
Session
Drums™
Recorder
CDDataDriveUSBMIDIUpgrading
the system
Recovery
CD
ClickPoint
calibration
(4) The SelectSong dialog box will display the song list
for the selected drive.
Click (highlight) the song you want to select, and click
the OK button (or press the panel YES key) to confirm
your choice. If there are five or more songs, use the scroll
bar/buttons to see them all.
(5) Verify that the song you selected is displayed as the
current song.
2. Location
The term “location” refers to a specific point in time within
the selected song, as displayed in the counter.
The counter shows the current location within the song. The
counter can be set to display the location in different formats.
You can also use the counter to move to a different location.
2-1. Switching the counter display
You can switch the units that the counter uses to display the
current location.
(1) Click the button to the left of the counter to open
the Time Disp Type dialog box.
(2) Select the type of units you want the counter to use,
and click the OK button (or press the panel YES key).
You can choose one of the following three formats
(→p.98 “Counter”).
Time display
• __:__:__.___ “hours” : “minutes” : “seconds” .
“milliseconds”
Frame display
• __:__:__:.__F “hours” : “minutes” : “seconds” .
“frames”
Measure display
• ___.__.___ “measures” . “beats” . “ticks”
Switching the information display area
The first line of the information display area shows the cur-
rently selected song. The second line can be switched to show
either the calendar, remaining time, scene settings, mark set-
tings, or pattern map.
(1) Click the button at the left of the counter to display
the Time Disp Type dialog box.
(2) Click one of the following five radio buttons, and then
click the OK button (or press the panel YES key).
• Date Time: calendar (date and time)
• Free Time: remaining time for recording
• Scene: name and location of the scene for the current
location in the song
• Mark: name of the mark for the current location in the
song. If there is no mark at the current location, this
displays the preceding mark and its location.
• PatternMap: the rhythm pattern at the current loca-
tion of the song
If the calendar has not been set, Date Time will be gray.
Information display
(2)
(2)
(2)
(1)
(1)
Song,
Locate
Song,
Locate