Filter
Top Products
107
Reference
Counter
Rename
METER
CH
VIEW
MIXEREFFECTCDSYSTEMMIDI/
SYNC
TEMPOSONGTRACKUNDO
STORESCENEMARK
SCRUB
LOC1/IN
...LOC6
ENTERMARK
JUMP
REC/PLAY
MODE
Transport
keys
Fader, CH ON, Pan, EQ, EFF 1/2, and AUX 1/2/3/4 filter set-
tings are valid only for channels that are disabled (highlighted).
The Effect button enables/disables and Trim the effect program
number and insert effect assignments.
The EFF 1/2 Return button enables/disables the Return Level
and Balance settings of the master effect 1/2.
3c-6. Mixer View
You can use the Mixer View screen to check the settings of a
scene.
Here you can view and edit the following parameters.
Faders, CH ON, pan, EQ LOW Gain/EQ MID Gain/
HIGH MID Gain/HIGH Gain, EFF1/2 Send, AUX 1/2/3/
4 Send, AUX 1/2/3/4 LEVEL, EFF 1/2 Return Level, EFF
1/2 Return Balance
If you move the faders and pan knobs on the top panel, the
screen will be updated to change the value accordingly, and
the selection will move to that parameter. If you operate the
EQ and send knobs, the changes will show when you return
to the “Mixer View” tab page.
D16XD
3c-1. Fader Pan
1. Post Fader level meters
These indicate the post-fader levels. The MASTER fader
is shown as L/R.
2. Pan [L63…C…R63]
Displays the pan setting. The value is displayed below
the icon.
3. Master level [–∞…+0]
This indicates the MASTER fader setting. The numerical
value is shown below the icon.
4. Level [–∞…+6]
This shows the setting of the currently selected channel
fader. The numerical value is shown below the icon.
Pan/fader guide
If the pan or fader value of the currently selected channel
differs from the position of the pan knob or fader, a guide
icon is displayed.
Recording and playback will occur according to the set-
tings shown in the screen. However if you want the set-
tings to match the physical positions of the faders and
knobs, set the SYSTEM “Control” parameter Fader/
Knob Control to Match (→p.127), and make adjustments
while watching the icons. If you set this parameter to
Jump, the guide icon will disappear since the value will
jump immediately to the position of the fader or knob
you move.
Fader
Pan
Icon
Difference from
current value
Relationship between position
and value
Large
Lower the fader position (the fader
is higher than the value)
Medium
Small
(none) None The position and value match
Small
Raise the fader position (the fader
is lower than the value)
Medium
Large
Icon
Difference from
current value
Relationship between position
and value
Large
Turn the pan knob toward the right
(the knob is to the left of the value)
Medium
Small
(none) None The position and value match
Small
Turn the pan knob toward the left
(the knob is to the right of the value)
Medium
Large
1
2
4
3
MIXER