Filter
Top Products
17
Introduction
Before using the D32XD/
D16XD for the first time
Main featuresParts and their functionItems and functions in the
TouchView display
Basic operation
Basic operation
1. Selecting the page mode
In order to access a particular function by using the TouchView screen, you first need to select
the page mode that contains that function, using the page mode keys.
The MIXER key and CD key will display a page jump menu in the LCD screen; use the page
mode buttons shown in the LCD screen to select the desired mode. Each time you press the
MIXER key or CD key, you will return to this page jump menu.
For details on the functions of each page mode, refer to “Reference” (→p.96–).
2. Selecting a tab page
Each page mode contains numerous parameters, and these are organized into pages. The pages
are divided by tabs. To select a tab page, press one of the tabs in the LCD screen. You can also
hold down the cursor (▼) key and use the LOC1/IN...LOC6 keys to select a tab.
Some page modes contain only one tab.
3. Selecting and setting parameters
Selecting a parameter
To select a parameter, press the edit icon, edit cell, or button shown in the LCD screen.
In most cases, you can use the cursor keys to move between parameters and press the ENTER
key to select one.
You cannot use the cursor keys to move between a dialog box and the original tab page.
Setting a parameter
There are different methods of setting a parameter, depending on the type of parameter.
Edit icons, edit cells, buttons
•Press the edit icon, edit cell, or button in the LCD screen to highlight it, and then turn the
value dial (or use the +/– keys) to set the value. If buttons are displayed in the LCD
screen, you can use these buttons as well.
Popup buttons, dialog boxes
•Press the popup button in the LCD screen to access the dialog box, and then select the
parameter value in the LCD screen. You can also use the value dial (or +/– keys) to select
the parameter value.
Toggle buttons
•Toggle buttons in the LCD screen will alternate between on and off each time you press
them. You can also use the cursor keys to highlight the button and then press the ENTER
key to switch the function on and off.
Radio buttons
•Press a button in the LCD screen to select it. In addition, you can use the cursor keys to
highlight the button and then press the ENTER key to select it.
Selecting one item from a menu list
•Press the desired item from the list shown in the LCD screen to select it.
• Use the buttons in the LCD screen to select the desired item.
• Use the value dial or +/– keys to make your selection.
Fader or pan settings
D32XD
When faders are shown in the LCD screen, moving a fader will automatically select and update
the value of the corresponding on-screen control. In addition, you can select a particular fader
or pan knob in the display by using the cursor keys. In either case, you can then use the value
dial (or the +/– keys) to edit the value. To set the pan, press a CH SELECT key to select a chan-
nel and use the pan knob located at the lower right of the LCD.
Basic operation Items and functions in the
TouchView display