Filter
Top Products
162
Category: Modulation
Modulation-type effects
34: Mono ER
Type Sharp, Loose, Modulated, Reverse
Selects the decay curve for the early reflection
ER Time 10...800msec
Sets the time length of early reflection
Predly (Pre Delay) 0...200msec
Sets the time taken from the original sound to the first early
reflection
Dry:Wet Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
LoDamp (Low Damp) THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
HiDamp (High Damp) 53Hz...20.0kHz, THRU
Sets the damping amount in the high range
35: Mono Delay
Time (Delay Time) 0...2.730sec (1.360sec)
Sets the delay time
Feedback (Feedback) –100...+100%
Sets the feedback amount
In Level (Input Level) 0...100%
Sets the input level to the effect
Dry:Wet Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
LoDamp (Low Damp) THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
HiDamp (High Damp) 53Hz...20.0kHz, THRU
Sets the damping amount in the high range
Analog (Analog Satulation) 0...100%
Sets the amount of analog distortion
36: Mn.Multitap Delay
(Mono Multitap Delay)
Tap1Time 0...2.730sec (1.360sec)
Sets the delay time of Tap1
Tap2Time 0...2.730sec (1.360sec)
Sets the delay time of Tap2
Tap3Time 0...2.730sec (1.360sec)
Sets the delay time of Tap3
WetLevel 0...100%
Sets the level of the effect sound
Tap1Level 0...100%
Sets the output level of Tap1
Tap2Level 0...100%
Sets the output level of Tap2
Tap3Level 0...100%
Sets the output level of Tap3
DryLevel 0...100%
Sets the level of the direct sound
LoDamp (Low Damp) THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
HiDamp (High Damp) 53Hz...20.0kHz, THRU
Sets the damping amount in the high range
37: Mono Chorus
*Speed (LFO Speed) 0.02...20.00Hz
Sets the LFO speed
*Depth 0...100
Sets the depth of LFO modulation
PreDly (Pre Delay) 0.0...50.0msec
Sets the delay time
Dry:Wet Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Waveform (LFO Waveform) Triangle, Sine
Selects LFO Waveform
LoDamp (Low Damp) THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
HiDamp (High Damp) 53Hz...20.0kHz, THRU
Sets the damping amount in the high range
Waveform (LFO Waveform) Triangle, Sine
Selects LFO Waveform
Analog (Analog Satulation) 0...100%
Sets the amount of analog distortion
38: Mono Flanger
*Speed (LFO Speed) 0.02...20.00Hz
Sets the LFO speed
*Depth 0...100
Sets the depth of LFO modulation
Feedback –100...+100%
Sets the feedback amount
Dry:Wet Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Waveform (LFO Waveform) Triangle, Sine
Selects LFO Waveform
LFO Shape –100...+100%
Determines how much the LFO waveform is changed
Fb HiCut (Feedback High Cut) 53Hz...20.0kHz, THRU
Sets the damping amount in the high range
Delay 0...50.0ms
Sets the left/right delay time
LoDamp (Low Damp) THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
HiDamp (High Damp) 53Hz...20.0kHz, THRU
Sets the damping amount in the high range
39: Mono Phaser
*Speed (LFO Speed) 0.02...20.00Hz
Sets the LFO speed
Depth 0...100
Sets the depth of LFO modulation
Resonance –100...+100%
Sets the resonance amount
Dry:Wet Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Manual 0...100
Sets the frequency to which the effect is applied
LFO Shape –100...+100
Determines how much the LFO waveform is changed