Filter
Top Products
58
For a 96 kHz/24-bit song, the DSP power is limited to 8 sizes-
worth for Routing A and 8 sizes-worth for Routing B; this
limits the number of effects you can use. (→p.56 “How DSP
power is allocated to the effects”)
D16XD
A maximum of eight insert effects can be used simultaneous-
ly, and these effect programs may have a total size of no more
than 8. In other words, you must assign effect programs so
that their total size stays within this limit.
If you use a size-2 effect for insert effect 1, only six more insert ef-
fects (3–8) will be available.
If you use a size-1 effect for insert effect 1, and a size-4 effect for
insert effect 2, only three more insert effects (6–8) will be available.
In the case of a 96 kHz/24-bit song, the DSP power will proc-
ess only “8 sizes-worth” of effect programs, so the number of
programs useable for each effect will be limited. (→p.56
“How DSP power is allocated to the effects”)
1-1. Applying insert effects during
recording
You can apply an insert effect to an audio input source con-
nected to the input jack, to the audio being input from the in-
ternal CD-R/RW drive, or from the built-in rhythm sounds,
and record the sound processed by the effect.
For details on how to apply an insert effect on a channel in-
put, refer to Quick Start. (→p.24)
1-2. Applying insert effects during
playback
You can apply an insert effect to the playback of a previous-
ly-recorded track.
For details on how to apply an insert effect to the track play-
back, refer to Quick Start. (→p.29)
2. Using master effects
To use a master effect, adjust the send level of each channel
to send some of its signal to the effect. The master effects are
typically used to apply reverb or to make the overall mix
richer and better balanced.
The D32XD/D16XD provides two master effects (MstEFF1
and MstEFF2), and these can be used simultaneously. How-
ever if you use a size-4 effect, the available processing power
of both master effects will be used, so only the master effect
1 settings will be applied.
To adjust the depth of the effect, adjust the send level from
each channel.
AUX send is used when applying external effects.
You can select an effect program for the master effect in the
EFFECT, “MstrEFF1”/“MstrEFF2” or the EFFECT, “Routing
A [*EFFRouting]” tab page.
For details on how to use the master effects, refer to Quick
Start. (→p.30)
3. Using the final effect
The D32XD/D16XD provides one stereo-in/stereo-out final
effect, which is applied to the master bus.
The final effect is used mainly with a dynamics-type effect
program (such as compression) to adjust the overall level for
mastering.
You can select an effect program for the final effect in the EF-
FECT, “FinalEFF” or the EFFECT, “Routing A [*EFFRout-
ing]” tab page.
For details on how to use the final effects, refer to Quick Start.
(→p.32)
1 2345678
Insert effect
Number of simultaneously usable insert effects and their size
Effect program size (conceptual)
Size-1
Size-2
Size-4
1 2 345678
Size-2
Available
1234567 8
Size-1
Size-4
Available
Master
effect 1
Number of simultaneously usable master effects and their size
Effect program size (conceptual)
Size-2
Size-4
Example 2
Assign a size-4 program
to master effect 1
Master
effect 2
Example 1
Assign a size-2 program
to master effect 1
Size-2
Available
Master
effect 1
Master
effect 2
Size-4
Master
effect 1
Master
effect 2