Filter
Top Products
7 - 6
MELSEC-Q
7 MEMORY CONFIGURATION AND DATA PROCESS
Buffer memory address
Buffer memory area configuration
Axis 1 Axis 2 Axis 3 Axis 4
Writing
possibility
Basic setting parameter area
30100 to
30115
30300 to
30315
30500 to
30515
30700 to
30715
Gain • filter setting parameter
area
30119 to
30152
30319 to
30352
30519 to
30552
30719 to
30752
Expansion setting parameter
area
30164 to
30184
30364 to
30384
30564 to
30584
30764 to
30784
Servo parameter area
Input/output setting parameter
area
30202 to
30204
30402 to
30404
30602 to
30604
30802 to
30804
Possible
Use of address Nos. skipped above is prohibited. If used, the system may not operate correctly.
POINT
When the parameter of the servo amplifier side is changed, it is transmitted to the servo memory area
in the buffer memory after the QD75MH is read automatically with parameters.
(1) When changing the servo parameters by the auto tuning.
(2) When the servo parameter is changing after the MR-configurator is connected directly with the servo
amplifier.