Filter
Top Products
10. Arpeggio & Assignable Knob Settings (Setup)
110 RS7000
[PATTERN] → [SETUP] × 4
The parameters in this page assign the MIDI transmit channel for
each track and output destination: the tone generator and MIDI A
and B connectors.
1
OUT SELECT........................................................[Knob 3]
[Settings] TG, MIDI A, MIDI B
TG.................. Output is sent to the RS7000 tone
generator.
MIDI A............ Output is sent to the MIDI OUT A
connector.
MIDI B............ Output is sent to the MIDI OUT B
connector.
Determines the MIDI output for which a channel number is
to be assigned.
2
OUT CHANNEL....................................................[Knob 4]
[Settings] OFF, 01 ~ 16
OFF................ No MIDI data is transmitted.
01 ~ 16........... MIDI data is transmitted on the
specified channel.
Specifies the MIDI transmit channel.
3
TR (Track)
[Settings] 01 ~ 16
Selects the track for which a transmit channel is to be
assigned.
To select a track press the appropriate key on the keyboard
while holding the [TRACK SELECT] button.
NOTE
When a knob is operated during pattern play-
back, playback of the style data corresponding
to the parameter assigned to that knob will stop.
For example, if a knob assigned to reverb send
is operated during pattern playback, the reverb-
send style data will stop playing back. Playback
will resume normally after playback is stopped,
the style number is changed, or the section is
changed.
[4] Out Channel Page
1
2
3
[Knob 3] [Knob 4]
NOTE
The graphic display on the left side of the LCD
shows the MIDI channel assignments for TG
(the internal tone generator), MA (MIDI A), and
MB (MIDI B).
The upper area of this display indicates the
MIDI transmit channel assignments for each
track.
The boxes in the lower area of the display indi-
cate when the MIDI channel assignment for the
corresponding destination is OFF or not. An
empty box indicates OFF, and a solid filled box
indicates that a transmit channel, 01 ~ 16, is
assigned.