Filter
Top Products
1. Song Playback
RS7000 183
4
The Song Mode
7 BPM (Tempo)
.... [Knob 4], [F4] → [Knob 4], [SHIFT]+[F4] → Numeric Keypad
[Settings] 001.0 ~ 300.0 (BPM)
Sets the song playback tempo.
Use [Knob 4] to adjust the BPM in steps of 1, or press [F4] to
move the cursor to the right of the decimal point and use
[Knob 4] to adjust in steps of 0.1.
8
OCT (Octave)
[Settings] -5 octaves ~ +5 octaves
Shows the current octave setting of the keyboard.
Each “ ” on the display corresponds to one octave down,
and each “ ” corresponds to one octave up.
The keyboard octave can be changed by pressing the [KEY-
BOARD] button so that its indicator goes out, and then using
the [OCT DOWN] and [OCT UP] buttons to set the octave.
Press the [OCT DOWN] and [OCT UP] buttons simulta-
neously to restore the normal keyboard octave settings (no
octave shift).
9
Transpose
[Settings] -36 ~ 0 ~ +36 (semitones)
Transposes the pitch of song playback.
Transposition is set in semitone increments. A setting of “12”
transposes by one octave.
[Procedure]
The transpose procedure is the same as in the PATTEN mode
(Page 73).
0
Track
[Settings] BPM, SCENE, 1 ~ 16
BPM..................BPM Track
SCENE..............Scene/Mute Track
1 ~ 16................Sequence Track
Shows the track type and numbers.
The currently selected track number is highlighted.
[Track Selection Procedure]
Except for BPM track and SCENE/MUTE track functions the
track selection procedure is the same as in the PATTERN
mode (Page 73).
The BPM track and SCENE/MUTE track are selected by
holding the [TRACK SELECT] button and pressing the [TR-]
or [TR+] button.
A
Track Status
Indicate whether the corresponding track contains data, as
well as the mute or solo status of the track.
:The track contains sequence data.
:The track is empty.
:The track is muted (no sound will be produced by this
track).
[S]:The track is soloed (all other tracks are temporarily
muted and only this track will sound).
:Sample data is assigned to this track.
[Mute & Solo Setting Procedure]
The mute and solo setting procedure is the same as in the PAT-
TEN mode (Page 74).
NOTE
BPM can also be set by using the [TAP] button
(Page 68).
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1
K
! L # M $ N % O & P ' Q ( R ) S - T @ U ^ V _ W { X } Y ~
ALL TR- TR+1~8 9~16
TRANSPOSE(-) TRANSPOSE(+)
ABC DE FGH IJ
TRACK
SELECT
Hold