Filter
Top Products
12. Saving to Memory Card or Disk
122 RS7000
7 Folder Select........................................................[Knob 3]
Selects the folder to which the file will be saved.
To export to the currently selected folder, select “Current” at
the top of the list.
8 NEW..................................................................................[F2]
Creates a new folder.
The folder-name entry display will appear.
This page allows entry of file names up to 8 characters in
length.
[Knob 2] moves the cursor to the desired character position.
The keyboard is used to enter a character at the cursor posi-
tion.
Refer to “Chapter 1: Basics”, page 67, for character-entry
details.
Press [F4] to create a folder and return to the export execu-
tion page.
Press [F3] to abort folder creation and return to the export
execution page.
9
(UP)...........................................................................[F3]
Moves to the next highest folder in the folder hierarchy.
0
OPEN................................................................................[F4]
Opens the selected folder, moving down one level in the
folder hierarchy.
A
EXPORT..........................................................................[F1]
When “CurrentDir” is selected, the file is saved to the cur-
rently selected folder.
Changes the name of a file or folder.
Rename Procedure
1. Press the [SAVE] button 3 times from the PATTERN Play or
Patch mode to go to the Rename page.
2. Press [F1] (CARD/SCSI) to specify whether you want to
rename a file on a memory card or disk.
3. Use [F2]( ) and [F3] (OPEN) to select a folder.
4. Use [Knob 2] to select the folder and file to be renamed.
5. Press [F4] (RENAME) to go to the name-entry dialog page.
6. Use [Knob 2] (FILE NAME) and the keyboard to enter a file
name.
7. Press [F4] to execute the rename operation and close the
rename dialog display.
8. Press [EXIT] 3 times to return to the PATTERN Play or Patch
mode.
Display Parameters
[PATTERN] → [SAVE] × 3
1 FILE.......................................................................... [Knob 2]
The file or folder to be renamed.
2
SCSI/CARD................................................................... [F1]
[Settings] SCSI, CARD
SCSI.............. The hard disk, ZIP disk, or other
SCSI disk connected to the SCSI
connector.
CARD............ A memory card inserted in the
card slot.
Selects the disk or memory card containing the file or folder
to be renamed.
[3] Rename Page
NOTE
When the target rename media is a SCSI disk,
files and folders on DOS-formatted disks can be
renamed.
[F4][F3][Knob 2]
NOTE
This function can be used to change the name
of any file or folder on a memory card or disk.
12 3 4 5
[Knob 2]
[F4]
[F1]
[F2]
[F3]