Filter
Top Products
7. Adjusting Level and Effects for Each Track (Mixer)
96 RS7000
[PATTERN] → [MIXER] × 4
1 VARIATION............................................................[Knob 1]
[Settings] 000 ~ 127
Sets the variation effect send level from the selected track,
and thus the depth of the variation effect for that track.
2
DELAY.....................................................................[Knob 2]
[Settings] 000 ~ 127
Sets the delay effect send level from the selected track, and
thus the depth of the delay effect for that track.
3
REVERB..................................................................[Knob 3]
[Settings] 000 ~ 127
Sets the reverb effect send level from the selected track, and
thus the depth of the reverb effect for that track.
4
DRY LEVEL...........................................................[Knob 4]
[Settings] 000 ~ 127
Specifies the “dry line” send level for each track.
The “dry line” is a direct connection to the outputs which
does not go through the system effects. In other words, an
effect bypass circuit. It is a stereo line in order to maintain the
stereo pan position of each track.
If the dry line level is reduced the depth of the system effects
is increased, but with some effects the sound may appear at
stereo center.
[4] Effect Send Page
3
4
1
2
[Knob 1] [Knob 2] [Knob 3] [Knob 4]