Filter
Top Products
7. Adjusting Level and Effects for Each Track (Mixer)
94 RS7000
2 PROGRAM (Program Number)....................[Knob 3]
[Settings]
Voice Bank (Bank Select MSB, LSB)
*** *** (Phrase), 000 000 (GM),
063 000 (SyBa&Ld1), 063 001 (SyPd&FX1),
063 002 (SyMater1), 063 003 (BandInst),
063 004 (Cls&Wind), 063 005 (Eth&Perc),
063 006 (SFX1), 063 007 (SyBa&Ld2),
063 008 (SyPd&FX2), 063 009 (SFX2),
064 000 (SmpLocal), 064 001 (SmpCmn),
126 000 (DrumKit), 127 000 (GM Drum)
Program Number 001 ~ 128
(depends on the voice bank)
Assigns a voice to each track for pattern playback.
Voice banks organize voices in voice-type categories, and are
selected using MIDI bank select MSB and LSB data.
The program number parameter selects the individual voices
in each bank.
When the BANK MSB and LSB are set to “*** ***
(Phrase)”, the voice specified for the phrase assigned to that
track is used. (Page 79)
3
HOLD (Voice Parameter Hold).....................[Knob 4]
[Settings] OFF, ON
OFF...................edited absolute voice parameters will
be reset.
ON.....................edited absolute voice parameters will
be retained.
Determines whether edited absolute voice parameters will be
retained when a different voice is selected.
When “OFF” the absolute voice edit parameters are initial-
ized each time a voice is selected. When “ON” the absolute
voice edit parameters are retained.
[PATTERN] → [MIXER] × 2
1 VOLUME................................................................ [Knob 1]
[Settings] 000 ~ 127
Sets the volume level of the selected track.
2
PAN.......................................................................... [Knob 2]
[Settings] L63 ~ L01, C, R01 ~ R63
Sets the stereo pan position of the selected track.
3
RANDOM PAN .................................................... [Knob 3]
[Settings] -64 ~ 0 ~ 63
Sets the depth of random pan for the selected track.
When set to “0” no panning occurs.
Other values produce a random pan position each time a note
is played.
4
OUTPUT SEL (Output Select)...................... [Knob 4]
[Settings] L&R, AS1, AS2, AS3, AS4, AS5, AS6,
AS1&2, AS3&4, AS5&6
L&R...................Output is sent to the RS7000 OUTPUT
jacks.
AS1, AS2, AS3, AS4, AS5, AS6, AS1&2, AS3&4,
AS5&6 ..............These settings send output to the cor-
responding individual outputs on the
optional AIEB2 I/O Expansion Board
(Page 20).
Specifies the output to which the sound from each track will
be sent.
The assignable outputs on the optional AIEB2 I/O Expansion
Board can be used to separately output specified patterns or
samples for processing via separate external audio devices.
AS1 through AS6 are mono output settings, while AS1&2,
AS3&4, and AS5&6 output a stereo program to the specified
output pair.
[PATTERN] → [MIXER] × 3
EQ TYPE = PEQ
NOTE
See “Chapter 1: Basics”, page 61 for details
about voice banks.
NOTE
The LFO User Wave parameters, Coarse Tune,
Detune, Pitch Bend Range, and Pitch Bend are
all absolute parameters, but their value will be
held whether ON or OFF.
[2] Volume/Pan/Out Page
1
2
3
4
[Knob 1] [Knob 2] [Knob 3] [Knob 4]
[3] Equalizer Page
1 2 43
[Knob 4][Knob 1] [Knob 2] [Knob 3]