Filter
Top Products
3. MIDI Filter
262 RS7000
Specifies which MIDI events will be transmitted via the MIDI OUT connector.
These settings apply to pattern and song playback via MIDI OUT. Mixer, voice edit and effect settings,
as well as knob and keyboard operations, are transmitted via MIDI OUT regardless of these settings.
Display Parameters
[Settings]
NOTE
PITCH BEND
PROGRAM CHANGE
CONTROL CHANGE
CHANNEL AFTER TOUCH
POLY AFTER TOUCH
EXCLUSIVE
The display shows whether the corresponding MIDI events
will be transmitted or not.
..................The corresponding MIDI event will not
be transmitted.
..................The corresponding MIDI event will be
transmitted.
Use [F1] and [F2] to move the cursor, and [F4] to check or un-
check the boxes.
3. MIDI Filter
NOTE
When an IN box is disabled, the corresponding
MIDI event will not be sent to the sequencer
and will not be recorded. All events are sent to
the tone generator section regardless of the
MIDI Filter settings.
[F1] [F2] [F4]