Filter
Top Products
2. MIDI Setup
RS7000 261
6
The Utility Mode
REC MONITOR..... MIDI data received via the MIDI IN
connector is re-transmitted via the
MIDI channel and MIDI output
assigned to the currently selected
track. In this case the currently
selected track will sound regard-
less of the original channel.
Determines whether received MIDI data is re-transmitted and
via which output.
5
TG PARAM OUT..................................................[Knob 1]
[Settings] OFF, OUT A, OUT B
OFF...................No parameter output.
OUT A...............Parameter data is transmitted via MIDI
OUT A.
OUT B...............Parameter data is transmitted via MIDI
OUT B.
Determines whether MIDI data corresponding to tone gener-
ator parameter changes made in one of the sub modes
(MIXER, VOICE EDIT, EFFECT) will be transmitted via a
MIDI OUT connector.
6
VOICE SETUP TO TG.......................................[Knob 2]
[Settings] OFF, ON
OFF...................Voices and effects are not changed
when a different style or song is
selected.
ON.....................The voice and effect settings stored
with each song or style are recalled
when a different song or style is
selected.
Determines whether or not the mixer, voice edit, and effect
parameters stored with each style or song will be recalled
when a style or song is selected.
7
MTC START OFFSET
.................................[Knob 4], [F4]
[Settings] Hour: Minute: Second: Frame
Hour..................00 ~ 23
Minute...............00 ~ 59
Second .............00 ~ 59
Frame ...............00 ~ 29
Specifies the time-code time from which sequence playback
will start MTC is received. This feature can be used to accu-
rately align playback of the RS7000 with an external MTC-
compatible device.
Use [F4] to select Hour, Minute, Second, or Frame, then use
[Knob 4] to set as required.
NOTE
The REC MONITOR setting is ideal when using
an external MIDI keyboard and tone generator
when using the RS7000 to create songs.
765
[Knob 1]
[Knob 2]
[Knob 4]
[F4]
[F1]
NOTE
• If program change or control change data is
included in the performance data, this data
will be changed when mixer, voice edit, or
effect data is recalled with a style or song.
• If a voice is set to “Phrase” in the PATTERN
mode, the voice setting will be changed
regardless of this setting.