Filter
Top Products
4. The Sample Jobs
RS7000 253
5
The Sampling Mode
2 KEY (Key Number) ............................................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the sample to be sliced.
3
AUDITION.......................................................................[F2]
Plays the specified sample.
4
DO!....................................................................................[F4]
Selects the sample to be sliced and moves to the next page.
5
MEAS (Measure).................................................[Knob 1]
6 METER.....................................................................[Knob 1]
7 SUB DIVIDE...........................................................[Knob 3]
8 SLICE TYPE..........................................................[Knob 4]
9 SENS (Slice Sensitivity)
0 DO!
For the details of each parameter, refer to the slice page (Page
235) of the sampling mode.
A
CREATE..........................................................................[F3]
If the original sample voice is a pitched voice, it will be saved
at this point by overwriting.
If the original sample voice is a sample kit voice, a page will
appear allowing you to select the track.
0 CREATE TO
............................................................. [Knob 2]
[Settings] TR01 ~ TR16
Specifies the track to which the sliced sample and note data
will be saved.
A
OK..................................................................................... [F3]
Saves the sliced sample and note data to the specified desti-
nation track.
Allows a name to be entered for the selected sample voice.
1
SAMPLE (Sample Number).......................... [Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be named.
2
NAME ← →........................................................... [Knob 3]
Enters a name of up to 8 characters for the sample voice.
Use [Knob 3] to move the cursor, and the keyboard to enter
the corresponding character at the selected character location.
Refer to “Chapter 1: Basics”, page 67, for more information
on name entry.
3
DO!................................................................................... [F4]
Enters the sample voice name.
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
The Slice Parameter Page
=
A
5
6
7
8
9
[Knob 1]
[Knob 3]
[Knob 3]
[F3]
NOTE
See page 237 for information on the amount of
free memory required for slice operations.
13 SAMPLE VOICE NAME
A=
[Knob 2] [F3]
2 31
[Knob 1] [Knob 3] [F4]