Filter
Top Products
2. MIDI Setup
260 RS7000
MIDI synchronization, echo back, and other MIDI-related setup parameters.
1 additional page can be accessed by using the [F1] and [F4] buttons, for a total of 2 MIDI Setup pages.
Display Parameters
1 MIDI SYNC.............................................................[Knob 1]
[Settings] INTERNAL, MIDI, MTC
INTERNAL........Synchronization to internal clock. Use
this setting when the RS7000 is to be
used alone or as the master clock
source for other equipment.
MIDI...................The RS7000 is synchronized to a MIDI
clock received from an external MIDI
master device via the MIDI IN connec-
tor.
MTC ..................The RS7000 is synchronized to an
MTC signal received via MIDI IN. MMC
signals are transmitted via MIDI OUT.
Use this setting when the RS7000 is to
be used as a MIDI slave, such as when
synchronized to an MTC-capable
MTR.
Determines which RS7000 playback will be synchronized to
the internal clock or an external MIDI clock.
2
MIDI CLOCK OUT.............................................. [Knob 2]
[Settings] OFF, MIDI A, MIDI B, MIDI A+B
OFF.............. MIDI clock is not transmitted.
MIDI A..........MIDI clock is transmitted via MIDI OUT A.
MIDI B..........MIDI clock is transmitted via MIDI OUT B.
MIDI A+B .....MIDI clock is transmitted via MIDI OUT A
and B.
Specifies whether and from which MIDI output MIDI clock
will be transmitted by the RS7000.
3
MIDI CONTROL .................................................. [Knob 3]
[Settings] OFF, IN, MIDI A, MIDI B, MIDI A+B,
IN/OUT A, IN/OUT B, IN/OUT A+B
OFF...................MIDI control is not transmitted.
IN.......................MIDI control is received but not tre-
ansmitted.
OUT A...............MIDI control is transmitted via MIDI
OUT A.
OUT B...............MIDI control is transmitted via MIDI
OUT B.
OUT A+B ..........MIDI control is transmitted via MIDI
OUT A and B.
IN/OUT A ..........MIDI control is received and transmit-
ted via MIDI OUT A.
IN/OUT B ..........MIDI control is received and transmit-
ted via MIDI OUT B.
IN/OUT A+B......MIDI control is received and transmit-
ted via MIDI OUT A and B.
Specifies whether and via which MIDI outputs MIDI control
signals — start, continue, stop, and song position pointer —
will be received and/or transmitted by the RS7000.
MMC signals are also transmitted when MIDI SYNC is set to
MTC.
4
ECHO BACK........................................................ [Knob 4]
[Settings]
OFF, THRU A, THRU B, THRU A+B, REC MONITOR
OFF....................... No echo back.
THRU A.................MIDI data received via the MIDI IN
connector is re-transmitted via the
MIDI OUT A connector.
THRU B.................MIDI data received via the MIDI IN
connector is re-transmitted via the
MIDI OUT B connector.
THRU A+B............MIDI data received via the MIDI IN
connector is re-transmitted via the
MIDI OUT A and B connectors.
2. MIDI Setup
NOTE
• MTC (MIDI Time Code) allows simultaneous
synchronization of multiple audio devices via
standard MIDI cables. It includes data corre-
sponding to hours, minutes, seconds, and
frames. The RS7000 does not transmit MTC.
A device such as the Yamaha AW4416 is
necessary as an MTC master.
• MMC (MIDI Machine Control) allows remote
control of multitrack recorders, MIDI sequenc-
ers, etc. A MMC-compatible multitrack
recorder, for example, will automatically
respond to start, stop, fast forward, and fast
reverse operations performed on the control-
ling sequencer, thus keeping playback of the
sequencer and multitrack recorder aligned.
3 421
[Knob 1]
[Knob 2]
[Knob 3]
[Knob 4]
[F4]