Filter
Top Products
4. The Sample Jobs
RS7000 245
5
The Sampling Mode
■ Select a Job
3. Use [Knob 1] (CATEGORY) and [Knob 2] (JOB) to move
the cursor to the desired job.
4. Press [F4] (SELECT) to go to the selected job page.
■ Executing Jobs 01 (COPY) ~ 04 (MOVE)
5. Use [Knob 1] (SAMPLE) and [Knob 2] (KEY) to select the
target sample. Press [F2] (AUDITION) to audition the
selected sample.
6. For the COPY and MOVE jobs use [Knob 3] (SAMPLE) and
[Knob 4] (TYPE) to select the destination sample.
7. Press [F4] (DO!) to execute the job.
8. Press [EXIT] 4 times to return to the original display page.
■ Executing Jobs 05 (NORMALIZE) ~ 11 (LOOP REMIX)
5. Use [Knob 1] (SAMPLE) and [Knob 2] (KEY) to select the
target sample. Press [F2] (AUDITION) to audition the
selected sample.
6. Use [Knob 3] and [Knob 4] to set the job parameters as
required.
7. Press [F4] (DO!) to execute the job. Press [F2] (AUDITION)
to audition the processed sample.
8. If the results aren’t satisfactory you can re-adjust the parame-
ters using [Knob 3] and [Knob 4] and then press [F4] (DO!)
again to re-execute the job.
9. Press [F3] (CREATE) to actually save the processed sample
to the target sample number, overwriting the original sample.
If the original sample is a Pitched Sample it will be overwrit-
ten at this point. If the original sample is part of a Sample Kit
Voice a key-number selection page will appear in which
[Knob 2] can be used to select the key number. Pressing [F3]
(OK) then overwrites the sample.
10. Press [EXIT] 4 times to return to the original display page.
Copies the specified sample to a different sample number.
When the target is a Sample Kit Voice, samples assigned to each
key number can be copied individually.
1
SAMPLE (Source Sample Number).......... [Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the source sample voice.
2
KEY (Source Key Number)........................... [Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the source sample.
3
SAMPLE
(Destination Sample Number) .................... [Knob 3]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the destination sample voice.
4
TYPE (Destination Type)............................... [Knob 4]
[Settings] PITCHED, KIT: C-2 ~ G8
Specifies the type of the destination sample voice.
Selects the sample key number when the destination sample
is a Sample Kit Voice type.
5
AUDITION...................................................................... [F2]
Plays the specified copy source sample.
6
DO!................................................................................... [F4]
Executes the job.
NOTE
When the DELETE or other job has been used
to delete a sample voice assigned to the cur-
rently selected track, pressing [EXIT] will skip
the Sample Edit page and return to the original
page.
01 COPY
NOTE
This parameter is not available when the speci-
fied source sample is a Pitched Voice.
NOTE
The PITCHED option is not available when a
Sample Kit Voice is stored in the destination
sample voice number.
3 4 61 2
5
[Knob 1]
[Knob 2]
[Knob 3]
[Knob 4]
[F2]
[F4]