Filter
Top Products
3. Basic Operation
RS7000 67
1
Basic
Job Selection
In the PATTERN mode, PATTERN CHAIN mode, SONG mode,
and SAMPLING mode job list pages [Knob 1] and [Knob 2] are
used to move the cursor to the desired job, and then [F4] is
pressed to actually select the job.
Character Entry
Style names, song names, file names for disk storage, etc. are all
entered using the same procedure. As an example, here’s how you
would enter a file name.
1 knob, 2 function buttons, the keyboard, the [CAPS] button, and
the [PAD1] and [PAD2] buttons are used for name entry.
1. Use [Knob 2] to move the cursor to the target character posi-
tion.
2. Press a white or black key on the keyboard to enter the corre-
sponding character.
Hold the [CAPS] button while pressing a key to enter a capi-
tal letter.
Hold down [SHIFT] and use the white keys of the keyboard
pad to enter symbols.
Press [PAD1] (SPACE) to enter a space.
Press the [PAD2] (DEL) to delete the character at the cursor
position.
3. Press [F4] to actually enter the selected character.
Track Selection
Hold the [TRACK SELECT] button and press the white key on
the keyboard corresponding to the track to be selected. The corre-
sponding key indicator will flash.
The track numbers are listed above the white keys.
Tracks can also be selected by using the black [TR-] and [TR+]
keys while holding the [TRACK SELECT] button.
Groups of tracks can be selected by using the black [All], [1-8],
or [9-16] keys while holding the [TRACK SELECT] button.
While the [TRACK SELECT] button is held the indicators above
the keys will light continuously, flash, or remain off to indicate
the status of the track, as follows:
Lit...............The corresponding track contains data.
Flashing......The corresponding track is selected.
Off..............The corresponding track does not contain data.
F1 F2 F3 F4
NOTE
File and folder names will automatically be
entered in upper case.
F1 F2 F3 F4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
K ! L # M $ N % O & P ' Q ( R ) S - T @ U ^ V _ W { X } Y ~ Z
TRANSPOSE(-) TRANSPOSE(+)
TRACK
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1
SOLO
K ! L # M $ N % O & P ' Q ( R ) S - T @ U ^ V _ W { X } Y ~
MUTE
TRANSPOSE(-) TRANSPOSE(+)
TRACK
SELECT