Filter
Top Products
4. The Sample Jobs
244 RS7000
13 jobs are provided for processing and modifying samples you’ve recorded.
● Job List
Sample Job Procedure
■ Call the Job List
1. Select the track to which the sample to be edited is assigned
in the PATTERN or SONG play mode (Page 73, 183)
2. Press [SAMPLE EDIT] 3 times to display the sample job list.
4. The Sample Jobs
NOTE
• The sample jobs are provided as a sub-mode of the SAMPLE EDIT mode. Press the [SAMPLE EDIT] but-
ton 3 times to access the sample job list.
• Before using the sample edit mode be sure to turn the UTILITY mode Memory Protect function OFF (Page
257). If the Memory Protect function is ON, “Memory Protected” will appear on the display when the [SAM-
PLE EDIT] button is pressed and it will not be possible to enter the edit mode.
• If no sample is assigned to the currently selected track, “the sample job list page” will appear when the
[SAMPLE EDIT] button is pressed.
• The “Undo” function cannot be used to undo sample edit operations.
FILE Category
01 COPY Copies the specified sample voice to another sample voice. P.245
02 DELETE Deletes the selected sample or sample voice. P.246
03 EXTRACT Deletes the portions of the sample prior to the specified start point and after the
specified end point.
P.246
04 MOVE Moves a sample or sample voice to a different sample voice number. P.246
PROCESS Category
05 NORMALIZE Maximizes the overall level of the selected sample. P.247
06 TIME STRETCH Changes the length of the sample without affecting the pitch. P.248
07 PITCH CONVERT Changes the pitch of the sample without affecting its length. P.248
08 FADE IN/OUT Creates fade-in or fade-out level variations. P.249
09 FREQUENCY CONVERT Halves the sample's sampling frequency. P.250
10 STEREO TO MONO Converts a stereo sample to mono. P.251
11 LOOP REMIX Remixes the sample by dividing it and rearranging the sections. The sound of
some sections can also be changed.
P.251
SLICE Category
12 SLICE Slices the sample into the specified beat units. P.252
NAME Category
13 SAMPLE NAME Enters a name for the selected sample. P.253
Category
Job
[Knob 1] [Knob 2]
[F4]