12. Saving to Memory Card or Disk
118 RS7000
Save Page Structure
The SAVE sub-mode includes the following display pages.
● Save...(Page 118)
Saves data from the internal memory to memory card or disk.
● Export...(Page 120)
Saves the selected sample or pattern to memory card or disk in a
standard format — SMF or WAV — that can be handled by a per-
sonal computer.
● Rename...(Page 122)
Changes the file name of a file stored on memory card or disk.
● Delete...(Page 123)
Deletes a specified file from memory card or disk.
● Format...(Page 124)
Formats a memory card or disk.
Saves internal data to a memory card or disk.
Save Procedure
1. Press the [SAVE] button from the PATTERN Play or Patch
mode to go to the Save page.
2. Use [Knob 1] (FILE TYPE) to select the type of file you want
to save.
3. If the “PATT” file type is selected, use [Knob 2] (PATTERN)
to select the style to be saved.
4. Press [F4] (CARD/SCSI) to specify whether you want to save
to a memory card or disk.
5. Press [F1] (OK) to go to the save execution page.
6. Use [Knob 1] (FILE NAME) and the keyboard to enter a file
name.
7. Use [Knob 3] to select the folder to which the file is to be
saved.
Select “CurrentDir” at the top of the list to save to the cur-
rently selected folder.
As necessary use [F3]( )/[F4](OPEN) to move between
folders, or [F2](NEW) to create a new folder.
8. Press [F1](SAVE) to execute the save operation.
If a file with the same file name already exists on the card or
disk, the “Overwrite? NO[F2]/YES[F3]” confirmation mes-
sage will appear.
Press [F3] if it is OK to overwrite the existing file and replace
it with the new file. Press [F2] to cancel the save operation
and return to the status prior to pressing the [F1] button (step
5, above).
9. Press [EXIT] to return to the PATTERN Play or Patch mode.
[1] Save Page
NOTE
When the save destination is SCSI it is neces-
sary to select the appropriate SCSI ID and parti-
tion in the SCSI Setup page.
NOTE
When the file save destination is SCSI only
DOS-formatted disks can be used (disks for-
matted by the RS7000 are formatted using DOS
format).