Filter
Top Products
1. Installing Optional Equipment
272 RS7000
The RS7000 provides slots, connectors, and installation space that can accommodate a variety of options for enhancing its performance
and functionality, such as SIMM expansion memory and I/O expansion boards.
Procedure
1. Be sure you have the following at hand before starting the installation.
• Phillips screwdriver: Magnetic-tipped screwdriver is recommended.
• Workbench: Please carry out all work on a stable workbench or table. Spreading a cloth over the work surface will prevent
scratching.
• Gloves: Be sure to wear gloves so that your hands are not scratched by the metal cover or other metal parts.
2. Switch off the RS7000 power, and unplug the power cord from the wall outlet.
3. Remove the screws holding the bottom cover in place.
• Set the RS7000 upside down on the workbench and use a Phillips screwdriver to unscrew the 12 screws from the bottom (see illus-
tration below).
4. Holding both sides of the bottom cover with both hands, lift the bottom cover straight up to remove it.
1. Installing Optional Equipment
Removing the Bottom Cover
CAUTION
Do not remove the screw marked A in the illustration below. This screw is not relevant to removing the bot-
tom cover.
Holes B in the diagram below have no connection with removing the bottom cover.
A
B