Filter
Top Products
2
The Pattern Mode
12. Saving to Memory Card or Disk
RS7000 119
Display Parameters
[PATTERN] → [SAVE]
FILE TYPE = PATTERN, CARD or DISK = CARD
FILE TYPE = PATTERN, CARD or DISK = SCSI
FILE TYPE = ALL, CARD or SCSI = CARD
1 FILE TYPE..............................................................[Knob 1]
[Settings] PATT, ALL
Specifies the type of data file to be saved.
For descriptions of the various file types see “About File
Types” on page 116.
2
PATTERN.............................................................. [Knob 2]
[Settings] Style ..... 01 ~ 64
Selects the pattern to be saved.
This parameter is not available when the FILE TYPE param-
eter is set to “ALL”.
3 SCSI/CARD................................................................... [F4]
[Settings] SCSI, CARD
SCSI.............. The hard disk, ZIP disk, or other
SCSI disk connected to the SCSI
connector.
CARD............ A memory card inserted in the
card slot.
Selects the disk or card to which the data is to be saved.
When CARD is selected and a properly formatted memory
card is in the card slot, a memory card icon will appear along
with the available memory on the card.
When SCSI is selected and a properly formatted disk is con-
nected to the SCSI connector, a disk icon will appear along
with the disk description, SCSI ID number, partition name,
and amount of available space in the partition.
4
OK..................................................................................... [F1]
Switches to the save execution page.
■ Save Execution Page
[PATTERN] → [SAVE] → [F1]
5 FILE NAME........................................................... [Knob 1]
Moves the cursor for file-name entry.
Use [Knob 1] to move the cursor to the desired character
position, then use the keyboard to enter the desired character.
Refer to “Chapter 1: Basics”, page 67, for character-entry
details.
1 2
4 3
Available
Icon
[Knob 1]
[Knob 2]
[F4][F1]
1 24
3
Available
Disk Type
Partition Name
[Knob 1] [Knob 2]
[F4][F1]
SCSI ID
Icon
4 3
1
[Knob 1]
[F4]
[F1]
Available Icon
NOTE
Empty styles which contain no data cannot be
saved.
0
[F1]