Filter
Top Products
4. The Sample Jobs
248 RS7000
8 OK......................................................................................[F3]
Saves the normalized sample to the specified destination key
number.
Changes the length of the sample without changing the pitch.
The sound quality of some samples may change.
1
SAMPLE (Sample Number)...........................[Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be time-stretched.
2
KEY (Key Number) ............................................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the sample to be time-stretched.
3
RATIO ......................................................................[Knob 3]
[Settings] 25 ~ 400%
Specifies the length of post-process sample as a ratio of the
length of the original sample (100%).
4
ACCURACY...........................................................[Knob 4]
[Settings] SOUND 4 ~ SOUND 1, NORMAL,
RHYTHM 1 ~ RHYTHM 4
SOUND 4 ~ SOUND 1
........These settings place emphasis on
sound quality, with the “SOUND 4”
setting producing the highest sound
quality.
NORMAL ..........Produces an optimum balance of
sound quality and rhythmic feel.
RHYTHM 1 ~ RHYTHM 4
........These settings place emphasis on
rhythmic feel, with the “RHYTHM 4”
setting producing the most accurate
rhythmic feel.
Specifies whether the sound quality or rhythmic feel of the
time-stretched sample will be emphasized.
5 AUDITION...................................................................... [F2]
Plays the specified sample.
Plays the time-stretched sample if pressed after [F4] (DO!) is
pressed to stretch the sample.
6 DO!................................................................................... [F4]
Executes the job.
7
CREATE......................................................................... [F3]
Saves the processed sample to the target sample number,
overwriting the original sample. If the original sample is a
Pitched Sample it will be overwritten at this point.
If the original sample is part of a Sample Kit Voice a key-
number selection page will appear.
8
CREATE TO
(Destination Key Number)........................... [Knob 2]
[Settings] C-2 ~ G8
Specifies the key number to which the processed sample will
be saved.
9
OK..................................................................................... [F3]
Saves the time-stretched sample to the specified destination
key number.
Changes the pitch of the sample without changing the length.
The sound quality of some samples may change.
1
SAMPLE (Sample Number).......................... [Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be pitch converted.
06 TIME STRETCH
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
3 4
67
12
5
[Knob 1]
[Knob 2] [Knob 3]
[Knob 4]
[F2]
[F3]
[F4]
07 PITCH CONVERT
98
[Knob 2]
[F3]
3
6
4
7
12
5
[Knob 1]
[Knob 2] [Knob 3] [Knob 4]
[F2]
[F3]
[F4]