Filter
Top Products
Appendix
1. Installing Optional Equipment
RS7000 273
Procedure
1. Holding both sides of the bottom cover with both hands, lower the cover straight down from above to its original position.
2. Use the original screws to re-attach the bottom cover.
• Replace the twelve screws to fasten the bottom cover.
3. Carefully turn the unit right side up.
Replacing the Bottom Cover
IMPORTANT
IMPORTANT
When replacing the bottom cover, be sure that you do not get cables caught or pulled between the cover and
main unit. This could cause broken connections or malfunctions.
CAUTION
Do not use screws other than those removed in step 3 (Page 272). Other screws can damage the unit.
Holes B in the diagram below are not screw holes. Be careful not to insert screws into these holes.
B