Filter
Top Products
1. System
RS7000 257
6
The Utility Mode
Master tuning, foot switch settings, and other overall system parameters are available via this page.
3 additional pages can be accessed by using the [F1] and [F4] buttons, for a total of 4 System pages.
Display Parameters
1 MASTER TUNE ...................................................[Knob 1]
[Settings] -102.4 ~ +102.3
Tunes the RS7000 tone generator in 0.1-cent increments.
(one “cent” = 1/100
th
of a semitone).
2
FOOT SWITCH.....................................................[Knob 2]
[Settings] SEQ START, SECTION, SUSTAIN, TAP,
SAMPLING
SEQ START......Pressing the footswitch alternately
starts and stops the RS7000
sequencer.
SECTION..........Pressing the footswitch selects the
section in sequence (A, B, C, etc.).
SUSTAIN ..........The footswitch functions as a sustain
pedal.
TAP...................Automatically sets the BPM according
to the speed at which the footswitch
tapped.
SAMPLING.......When the trigger mode is MANUAL
the footswitch has the same function
as the [STANDBY/START/STOP] but-
ton.
Selects the function of a footswitch connected to the rear-
panel FOOT SW jack.(Page 23)
3
PATTERN QUANTIZE...............................[Knob 3]
[Settings] 1, 1/2, 1/4, 1/8, 1/16
1........................1 measure
1/2.....................Half note
1/4.....................Quarter note
1/8.....................8
th
note
1/16...................16
th
note
Specifies whether style and section changes will be made on
measure boundaries, or 1/2-note ~ 1/16-note boundaries.
4
MEMORY PROTECT.................................[Knob 4]
[Settings] OFF, ON
OFF...................It is possible to record or edit pat-
terns, songs, and sample voices.
ON.....................It is not possible to record or edit pat-
terns, songs, and sample voices.
Determines whether the memory containing patterns, songs,
and samples will be protected or not.
5
CLICK MODE....................................................... [Knob 1]
[Settings] OFF, REC, REC/PLAY, ALL
OFF...................The click will not sound.
REC...................The click will sound during real-time
recording only.
REC/PLAY........The click will sound during real-time
recording and playback.
ALL ...................The click will always sound.
Determines whether and when the metronome click will
sound.
6
CLICK BEAT........................................................ [Knob 2]
[Settings] 16, 08, 04, 02, 01
Determines on which beats the metronome click will sound.
16 = 16
th
notes, 08 = 8
th
notes, 04 = quarter notes, 02 = half
notes, and 01 = whole notes.
7
REC COUNT......................................................... [Knob 3]
[Settings] OFF, 1 ~ 8 MEAS
OFF...................Recording starts as soon as the
[PLAY] button is pressed in the Rec
Standby mode.
1 ~ 8 MEAS.......Sets the number of count-in measures
provided before recording starts.
Sets the number of count-in measures provided before
recording starts in the real-time recording modes.
1. System
3 421
[Knob 1]
[Knob 2]
[Knob 3]
[Knob 4]
[F4]
7 865
[Knob 1]
[Knob 2]
[Knob 3]
[Knob 4]
[F4]
[F1]