Filter
Top Products
The Controls & Connectors
14 RS7000
[SWING/VELOCITY] Knob
With the initial default settings, this knob provides real-
time control of the PLAY FX SWING and VELOCITY
parameters.
SWING adjusts the timing of the 8th-note up (back) beats
to create a bounce or swing feel (Page 89). VELOCITY
adjusts the velocity of the notes (Page 88).
[SELECT] Button
Selects one of the two functions/parameters assigned to
each knob. The indicator next to the currently selected
parameters will light.
9
[EFFECT SEND/VOLUME] Knobs
In addition to the functions described here, these knobs are
fully assignable and can be set up to control a wide range
of functions and parameters.
Since the knobs allow continuous parameter control for the
selected track, they can be used for creative real-time per-
formance sound control.
The default assignments for these knobs are the main
MIXER parameters. Refer to “Chapter 2: The Pattern
mode”, page 69, for more information on the MIXER
parameters.
[DRY VARI] Knob (Page 96)
With the initial default settings, this knob provides real-
time control of the MIXER DRY SEND LEVEL parame-
ter. This adjusts the level of the signal sent to the dry line.
[DELAY/CHO] Knob (Page 96)
With the initial default settings, this knob provides real-
time control of the MIXER DELAY/CHORUS SEND
LEVEL parameter. This adjusts the level of the signal sent
to the delay or chorus effect.
[REVERB] Knob (Page 96)
With the initial default settings, this knob provides real-
time control of the MIXER REVERB SEND LEVEL
parameter. This adjusts the level of the signal sent to the
reverb effect.
[TRACK VOLUME] Knob (Page 94)
With the initial default settings, this knob provides real-
time control of the volume of the currently selected track.
0
LFO Knobs
In addition to the functions described here, these knobs are
fully assignable and can be set up to control a wide range
of functions and parameters.
Since the knobs allow continuous parameter control for the
selected track, they can be used for creative real-time per-
formance sound control. 3 functions can be assigned to the
[DEPTH] knob, selected by the [AMP/FILTER/PITCH] but-
ton B to its right.
The default assignments for these knobs are the main LFO
parameters.
[SPEED] Knob (Page 98)
With the initial default settings, this knob provides real-
time control of the LFO SPEED parameter.
[DEPTH] Knob (Page 98)
With the initial default settings, this knob provides real-
time control of the LFO DEPTH parameter. Depending on
the function selected by the [AMP/FILTER/PITCH] but-
ton B, the [DEPTH] knob can control the depth of a trem-
olo, wow, or vibrato effect.
[WAVE] Button (Page 98)
Selects the LFO waveform.
A
[EG] Knobs
In addition to the functions described here, these knobs are
fully assignable and can be set up to control a wide range
of functions and parameters.
3 parameters are assigned to each knob, selectable via the
[AMP/FILTER/PITCH] button B.
Since the knobs allow continuous parameter control for the
selected track, they can be used for creative real-time per-
formance sound control.
The default assignments for these knobs are the main
MIXER parameters. Refer to “Chapter 2: The Pattern
mode”, page 69, for more information on the MIXER
parameters.
DRY VARI DELAY/CHO REVERB TRACK VOLUME
EFFECT SEND / VOLUME
[DELAY/CHO] Knob
[REVERB] Knob
[TRACK VOLUME] Knob
[DRY VARI] Knob
SPEED
WAVE
DEPTH
S&H
PGM
USER
LFO
[WAVE] Button
[SPEED] Knob
[DEPTH] Knob
ATTACK DECAY SUSTAIN RELEASE
EG
[DECAY] Knob
[ATTACK] Knob
[SUSTAIN] Knob
[RELEASE] Knob