Filter
Top Products
2
The Pattern Mode
13. Loading from Memory Card or Disk
RS7000 127
7. Press [F4] to execute the load operation.
If the destination style or sample voice already contains data
the “Are You Sure? No[F2]/Yes[F3]” confirmation prompt
will appear.
The confirmation prompt will always appear when the “ALL”
file type is selected.
Press [F3] if it is OK to overwrite the corresponding memory
contents.
Press [F2] to abort the load operation and return to the status
of the RS7000 prior to pressing the [F1] button.
8. Press [EXIT] to return to the PATTERN Play or Patch mode.
Display Parameters
[PATTERN] → [LOAD]
CARD or DISK = CARD
CARD or DISK = SCSI
1
FILE TYPE............................................................. [Knob 2]
[Settings] PATT, ALL, ALL+SYSTEM, SMPL
PATT (Pattern)
............... A single style is loaded into the
specified style number in the
internal memory from a PATT
type (.R2P) or ALL type (.R2A) file.
ALL .................An ALL type (.R2A) file is loaded
and all internal memory except the
system setup data is overwritten.
ALL+SYSTEM
............... An ALL type (.R2A) file is loaded
and all internal memory including
the system setup data is overwrit-
ten.
SMPL ..............A specified sample from multiple
sample voices included in a PATT
(.R2P), SONG (.RS2), or ALL (.R2A)
type file can be loaded to the speci-
fied sample voice number.
Specifies the type of data file to be loaded.
For details about the various file types see “About File
Types” on page 116.
2
SCSI/CARD.................................................................. [F1]
[Settings] SCSI, CARD
SCSI.............. The hard disk, ZIP disk, or other
SCSI disk connected to the SCSI
connector.
CARD............ A memory card inserted in the
card slot.
Selects the disk or card from which the data is to be loaded.
When CARD is selected and a properly formatted memory
card is in the card slot, a memory card icon will appear along
with the available memory on the card.
When SCSI is selected and a properly formatted disk is con-
nected to the SCSI connector, a disk icon will appear along
with the disk description, SCSI ID number, and partition
name.
3
OK..................................................................................... [F4]
Switches to the load execution page.
■ Load Execution Page
[PATTERN] → [LOAD] → [F4]
NOTE
When the LOAD service is a SCSI disk it is neces-
sary to select the appropriate SCSI ID and parti-
tion in the SCSI Setup page.
2 13
[Knob 2] [F4][F1]
2 13
[Knob 2] [F4][F1]
Partition Name
Disk Type
SCSI ID
Icon