Filter
Top Products
SCPI Commands for the VX4101A
VX4101A MultiPaq Instrument User Manual
3–7
Commands
TRIGger([:SEQuence1]|:STARt)[:LAYer]:FIRe<command trigger>
TRIGger ([:SEQuence1]|:STARt)[:LAYer]:TIMer <timer seconds>
Queries
TRIGger([:SEQuence1]|:STARt)[:LAYer]:TIMer?
ABORt Subsystem
ABORt:COMPlete
ABORt[:IMMediate]
N/A
N/A
N/A
INSTrument:ABORt
INITiate
INITiate:CONTinuous
ABORt[:COMPlete]
Place all instruments in the IDLE state, aborting after the current SEGMent or
SEQuence is complete. The instrument configuration is unchanged and a
subsequent INIT command will cause the instrument to re-start the same type of
measurement. Regardless of whether the instrument is in Synchronous or
Asynchronous Mode, you can send this command while a query is in progress
and abort any measurement.
For more information on how the VX4101A handles queries in both Synchro-
nous and Asynchronous mode, see About VX4101A Operational Modes.
ABORt[:IMMediate]
Places all instruments in the IDLE state, immediately aborting any measurement
or other instrument activity currently in progress. The instrument configuration
is unchanged and a subsequent INIT command will cause the instrument to
re-start the same type of measurement.
TRIGger Subsystem
Command Syntax
Query Syntax
*RST Value
Limits
Related Commands
Command Description