Filter
Top Products
VX4101A MultiPaq Instrument User Manual
3–169
SCPI Commands for the Digital to Analog Converter
This section includes a summary of SCPI commands you can use to control the
Digital to Analog Converter (DAC) of the VX4101A MultiPaqtInstrument. The
commands enable you to calibrate the instrument, define the format for your
input or output, prepare and initiate waveform generation, and query the
instrument’s current status.
Command Summary
The command syntax for the DAC is as follows:
CALibrate[<channel>]:OUTput <channel >
CALibrate[<channel>]:VALue <channel>,<DVM reading>
CALibrate[<channel>]:SAVe
Commands
FORMat[:DATA] <format>
Queries
FORMat[:DATA]?
Commands
INITiate
:CONTinuous [0|OFF|1|ON]
[:IMMediate]
Queries
INITiate:CONTinuous?
Commands
INSTrument:ABORt([:IMMediate]|:COMPlete)
INSTrument:RESet
Commands
OUTPut:TRIGger:SOURce <trigger source>
CALibrate Subsystem
FORMat Subsystem
INITiate Subsystem
INSTrument Subsystem
OUTPut Subsystem