Filter
Top Products
Index
Index–4
VX4101A MultiPaq Instrument User Manual
M
Maintenance, Preventive, H–1
MEASure commands, for Digital Input, 3–128
MEASure? queries
for Counter, 3–91
for Digital Multimeter (DMM), 3–227
Messages, How VX4101A handles, 4–1
N
Normal Transfer Mode, C–1
O
Operational Check
For Counter, 1–27
For Digital Input, 1–28
For Digital Multimeter (DMM), 1–27
For Digital Output, 1–28
For Digital to Analog Converter (DAC), 1–29
For Option 1A, 1–29
For option 1D, 1–28
For Relay Driver, 1–28
For SurePath(tm), 1–27
For VX4101A Multipaq Instrument, 1–27
Using the Soft Front Panels, 1–26
Options, 1–13
1T, 1–13
Option 1A, 1–13
Option 1D, 1–13
Possible options available, 3–20
Output amplitude, And the Digital to Analog Converter
(DAC), 2–47
OUTPut Commands, for Digital to Analog Converter
(DAC), 3–176
OUTPut commands, for Counter, 3–100
OUTput Commands, For VX4101A Multipaq
Instrument, 3–14
OUTput commands, for Digital Output, 3–153
P
Performance Verification Procedures, F–1
Performance Verification Procedures, using the Soft
Front Panels, F–1
Phase, 3–97
Pin Assignments, 2–37
When shared by Digital Input and Digital Output,
2–37
When used by the Digital Input and Digital Output
Together, 2–37
When used only by the Digital Input, 2–33
Power Line Noise, and the Digital Multimeter (DMM),
2–43
Power-On
Commands available at, 1–22
LED states at, 1–25
Power-on sequence, 1–7
Product Description, 1–1
Product description, Physical description, 1–7
R
READ? queries
for Counter, 3–102
for Digital Multimeter (DMM), 3–234
Relay Drivers
Description, 1–5
Directing signals through, 3–255
Opening and closing a relay with, 2–55
ROUTe commands, 3–255
SCPI commands for, 3–255
STATus commands, 3–257
Using, 2–55
Reset values, 3–297
Resistance, Two-wire measurements, 2–45
Rise Time Measurements, Using the Counter for, 2–29
ROUTe commands
for Relay Drivers, 3–255
for SurePath, 3–264
Routing signals, through SurePath modules, 3–264
S
Sample, 2–47
Definition of, 2–47
SCPI Commands
Available at power-on, 3–20
for Counter, 3–29
for Digital Input, 3–115
for Digital Multimeter, 3–197
for Digital Output, 3–147
for Digital to Analog Converter (DAC), 3–169
for Relay Drivers, 3–255
for SurePath modules, 3–259
For the VX4101A, 3–5
Segment, Definition of, 2–47
Self–test
For Counter, 1–11