Filter
Top Products
SCPI Commands for the Digital Multimeter
3–254
VX4101A MultiPaq Instrument User Manual
TRIGger([:SEQuence1]|:STARt)[:LAYer]:MODE
Command Response
INST:SEL DMM Selects the DMM
CONF:ARR:VOLT:DC 3 Configures for 3 DC voltage measurements
TRIG:MODE ONCE Sets up the instrument to make one measurement and then
re-enter the initiated state
TRIG:SOUR COMM0 Selects COMM0 as the trigger source
INIT Starts the measurement
FETC:COUN? 0
TRIG:FIR0
FETC:COUN? 1
TRIG:FIR0
TRIG:FIR0
FETCH:COUN? 3
FETC? #239–6.04180E+00,–6.04180E+00,–6.04180E+00
TRIGger([:SEQuence1] |:STARt)[:LAYer]:SOURce
Command Response
TRIG:SOUR:CAT? HOLD, IMMEDIATE, BUS, TTLTRG0, TTLTRG1, TTLTRG2,
TTLTRG3, TTLTRG4, TTLTRG5, TTLTRG6, TTLTRG7,
COMMAND0, COMMAND1, COMMAND2, COMMAND3,
COMMAND4, TIMER, SUREPATH, DMM, COUNTER,
CTR_EXTARM, DAC, DIGI, DIGO, HANDSHAKE
INST:SEL DMM
CONF:VOLT:DC
TRIG:SOUR BUS
INIT
FETC:COUN? 0
*TRG
FETC:COUN? 1
FETC? –6.03720E+00