Filter
Top Products
SCPI Commands for the Digital Output
VX4101A MultiPaq Instrument User Manual
3–149
Queries
TRIGger([:SEQuence1]|:STARt)[:LAYer]:DELay?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:ECOunt?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:HANDshake:POLarity
:REQuest?
:STRobe?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:MODE?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:SOURce?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:SOURce:CATAlog[ALL]?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:SOURce:CATalog:DELayable?
TRIGger([:SEQuence1]|:STARt)[:LAYer]:SOURce:CATalog:FIXed?
NOTE. The Digital Output shares pins with the Digital Input. When using a pin
as an input, Tektronix recommends that you clear and initialize the Digital
Output for High (inactive) output, unless the pin is intended to be a bi-direction-
al input/output pin.
FORMat Subsystem
This subsystem formats return data.
FORMat[:DATA] <format>
FORMat[:DATA]?
Parameter Value
<format> HEX
Parameter Value
<format> INTeger|HEXadecimal|BINary
N/A
The FORMat[:DATA] command specifies the format of the data returned from
all TRACe:DATa queries. Data can be returned in an ASCII integer, ASCII
hexadecimal, or binary format.
Command Syntax
Query Syntax
*RST Value
Limits
Related Commands
Command Description