Filter
Top Products
SCPI Commands for the Digital Input
VX4101A MultiPaq Instrument User Manual
3–127
N/A
INSTrument:ABORt [:IMMediate]
This command places the Digital Input in the idle state, and terminates any
activities that are currently in progress. A subsequent INIT command will cause
the Digital Input to initiate a new operation based upon the current configuration,
which is unchanged by the ABORt. After execution, the Digital Input Instrument
is still selected.
You can use this command for terminating an unsuccessful pre-match capture.
INSTrument:RESet
This command resets the Digital Input to its power-on (default) state. After
execution, the Digital Input remains selected. After reset, the Digital Input
memory is initialized to zero. The sample rate and points are at their default
values.
N/A
INSTrument:ABORt
Command Response/Description
inst:sel digi Selects the Digital Input
(Digital Input configuration commands)
inst:abor Aborts the Digital Input activity
instrument:select? DIGI
Queries the current instrument
INSTrument:RESet
Command Response/Description
inst:sel digi Selects the Digital Input
instrument:reset Resets the Digital Input
inst:sel? DIGI
Queries the instrument selected
Limits
Command Description
Query Response
Examples