Filter
Top Products
SCPI Commands for the Digital Multimeter
VX4101A MultiPaq Instrument User Manual
3–207
Parameter Value
<count> 1
<offset> 1
<step_size> 1
<threshold> User defined, depending on measurement
<threshold1> User defined, depending on measurement
<threshold2> User defined, depending on measurement
<numeric_value> N/A
<min> N/A
<max> N/A
Parameter Value
<count> 1–4096
<offset> 1–4096
<step_size> 1–4096
<threshold> User defined, depending on measurement
<threshold1> User defined, depending on measurement
<threshold2> User defined, depending on measurement
<numeric_value> N/A
<min> N/A
<max> N/A
CALCulate:LIMit:ENVelope[:DATA] <threshold1>,<threshold2>
This command searches for all the input data values within an envelope of values
defined as being above, below, or in between, a set of boundary values. The
range of the envelope is determined by the <threshold1> and the <threshold2>
values. For example:
H If the <threshold2> is greater than the <threshold1>, the range of data
values searched for is above the <threshold1> value or below the
<threshold1> value.
H If the <threshold2> is less than <threshold1>, the range of data values
searched for is between the <threshold1> and <threshold2>.
*RST Value
Limits
Command Description