Filter
Top Products
SCPI Commands for the Counter
VX4101A MultiPaq Instrument User Manual
3–41
Query Response
ARM ([:SEQuence1] |:STARt)
[:LAYer]:DELay?
<delay in seconds>
ARM ([:SEQuence1] |:STARt)
[:LAYer]:ECOunt?
<triggers to count>
ARM ([:SEQuence1] |:STARt)
[:LAYer]:LEVel?
TTL | ECL | ZERO | MAXimum | MINimum | AUTO | <desired
voltage>
ARM ([:SEQuence1] |:STARt)
[:LAYer]:MODE?
ONCE|ALL
ARM ([:SEQuence1] |:STARt)
[:LAYer]:SLOPe?
POSitive | NEGative
ARM ([:SEQuence1] |:STARt)
[:LAYer]:SOURce?
<current source>
ARM ([:SEQuence1] |:STARt)
[:LAYer]:SOURce:CATalog
[:ALL]?
Lists all trigger sources available for use with the ARM:SOUR
command. Specifies the start arming source for the Counter.
The possible responses are:
HOLD, IMMEDIATE, BUS, TTLTRG0, TTLTRG1, TTLTRG2,
COMMAND0, COMMAND1, COMMAND2, COMMAND3,
COMMAND4, TIMER, SUREPATH, DMM, COUNTER,
CTR_EXTARM, CTR_CHAN2, TTLTRG3, TTLTRG4,
TTLTRG5, TTLTRG6, TTLTRG7
ARM ([:SEQuence1] |:STARt)
[:LAYer]:SOURce:CATalog:
DELayable?
Lists all delayable trigger sources available for use with the
ARM:SOUR command. This command specifies the start
arming source for the Counter. The possible responses are as
follows:
BUS, TTLTRG0, TTLTRG1, TTLTRG2, TTLTRG3, TTLTRG4,
TTLTRG5, TTLTRG6, TTLTRG7, COMMAND0, COMMAND1,
COMMAND2, COMMAND3, COMMAND4, SUREPATH, DMM,
COUNTER, CTR_EXTARM, DAC, DIGI, DIGO
ARM ([:SEQuence1] |:STARt)
[:LAYer]:SOURce:CATalog:
FIXed?
Lists all fixed trigger sources available for use with the
ARM:SOUR command. This command specifies the start
arming source for the Counter. The possible responses are as
follows:
HOLD,IMMEDIATE,TIMER,CTR_CHAN2
ARM(:SEQuence2 |:STOP)
[:LAYer]:DELay?
<delay in seconds>
ARM (:SEQuence2 |:STOP)
[:LAYer]:ECOunt?
<triggers to count>
ARM(:SEQuence2 |:STOP)
[:LAYer]:SOURce?
<current source>
Query Response