Filter
Top Products
SCPI Commands for the Counter
VX4101A MultiPaq Instrument User Manual
3–87
INPut[1|2]:FILTer[:LPASs]:FREQuency?
Without one of the optional arguments, this command moves to the output buffer
the current setting in Hz of the input lowpass filter. If one of the optional
arguments is included, the MINimum, MAXimum or DEFault value for filter is
moved to the output-buffer instead.
INPut[1|2]:FILTer[:LPASs][:STATe]?
Without the optional parameter, this command moves to the output buffer the
current setting of the input lowpass filter state for the specified channel. If the
optional argument DEFault is included, the default filter state is moved to the
output_buffer. The possible values returned are 1 for ON and 0 for OFF.
INPut[1|2]:GAIN?
Without one of the optional parameters, this command moves to the output
buffer the current setting of the input gain for the specified channel. If the one
optional parameters is used, the DEFault, MINimum or MAXimum value for
gain is moved to the output buffer.
INPut[1|2]:OFFSet[:ABSolute]?
Without one of the optional arguments, this command moves to the output buffer
the current setting in volts of the offset. If one of the optional arguments is used,
the MINimum, MAXimum or DEFault value for offset is moved to the output
buffer instead.
If the offset was set with the INPut:OFFSet:RELative command, the value
returned will be the voltage the offset will be set to at INITiate time.
INPut[1|2]:OFFSet:RELative?
This query moves the offset voltage of the input channel to the output buffer. In
the process, the offset voltage is corrected for the attenuation.
INPut:SETup:AUTO?
This command moves the current setting of autosetup to the output buffer. The
returned value will be 0 for OFF, 1 for ON and ONCE for ONCE.