Filter
Top Products
SCPI Commands for the Digital to Analog Converter
VX4101A MultiPaq Instrument User Manual
3–175
N/A
N/A
ABORt:IMMEDiate
ABORt:COMPlete
INSTrument:ABORt([:IMMediate]|COMPlete)
This command places the DAC in the idle state, and terminates any activities
that are currently in progress. The instrument configuration is unchanged and a
subsequent INIT command will cause the DAC to re-start its previous activity.
After the activity completes, the DAC remains selected. INST:ABORt:COM-
Plete terminates activity after the present sequence is completed.
INST:ABORt:IMMediate terminates operation on the next sample.
INSTrument:RESet
This command resets the DAC to its power-on state and sets the instrument to its
default conditions. After execution, the DAC is remains selected. After reset, the
DAC memory is initialized to zero; the sample rate and points are at their default
values; each output is set to 0 V; the indice are 0,0; repeat period is set to off (i.e.
no waveform segment gaps). The output will remain at 0V and the indice at 0,0
until the TRACe:DATA command is used to load memory and the instrument in
initiated. The default trigger state is internal.
ABORt:IMMediate
ABORt:COMPlete
INSTrument:ABORt
Command Response/Description
INST:SEL DAC Selects the DAC
INIT:CONT ON Initiates the DAC instrument
INST:ABOR Aborts the DAC activity
INST:SEL? DAC
Queries for the selected instrument
*RST Value
Limits
Related Commands
Command Description
*RST Value
Examples