Filter
Top Products
Appendix A: Specifications
A–28
VX4101A MultiPaq Instrument User Manual
Certifications and Compliances
Table A–62: Certifications and compliances
Characteristics Description
EC Declaration of Conformity -
EMC
Meets intent of EMC Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EN 55011 Class A Radiated and Conducted Emissions
EN 50081-1 Emissions:
EN 60555-2 AC Power Line Harmonic Emissions
EN 50082-1 Immunity:
IEC 801-2 Electrostatic Discharge Immunity
IEC 801-3 RF Electromagnetic Field Immunity
IEC 801-4 Electrical Fast Transient/Burst Immunity
IEC 801-5 Power Line Surge Immunity
To ensure compliance with EMC requirements, this module must be installed in a mainframe which
has backplane shields installed complying with Rule B.7.45 of the VXIbus Specification. Also, only
high quality shielded cables having a reliable, continuous outer shield with low impedance
connections to shielded connector housings at both ends should be connected to this product.
Australian Declaration of
Conformity - EMC
Conforms with the following standards in accordance with the Electromagnetic Compatibility
Framework:
AS/NZS 2064.1/2 Class A Radiated and Conducted Emissions
To ensure compliance with EMC requirements, this module must be installed in a mainframe which
has backplane shields installed which comply with Rule B.7.45 of the VXIbus Specification.
Additionally, only high quality shielded cables having a reliable, continuous outer shield which has
low impedance connections to shielded connector housings at both ends should be connected to
this product.
EC Declaration of Conformity -
Low Voltage
Meets intent of Low Voltage Directive 73/23/EEC as amended by 93/68/EEC, for Product Safety.
Compliance was demonstrated to the following specification as listed in the Official Journal of the
European Communities:
EN 61010-1/A2:1995 Safety requirements for electrical equipment for measurement,
control, and laboratory use.
Approvals UL3111-1 - Standard for electrical measuring and test equipment
CAN/CSA C22.2 No. 1010.1 - Safety requirements for electrical equipment for measurement,
control and laboratory use.
Safety Certification of Plug-in or
VXI Modules
For modules (plug-in or VXI) that are safety certified by Underwriters Laboratories, UL Listing
applies only when the module is installed in a UL Listed product.
For modules (plug-in or VXI) that have cUL or CSA approval, the approval applies only when the
module is installed in a cUL or CSA approved product.
Installation Category Descriptions Terminals on this product may have different installation category designations. The installation
categories are: