Filter
Top Products
SCPI Commands for the Counter
3–50
VX4101A MultiPaq Instrument User Manual
Bin # Limits
5 25 –30
6 30 –35
Data Bin
6 1
33 6
15 3
35 6
CALCulate:TRANsform:HISTogram:RANGe <minimum>,<maximum>
This command sets the minimum and maximum values to use in a histogram
calculation.
CALCulate:TRANsform:HISTogram:RANGe:AUTO <ON|OFF>
This command sets the minimum and maximum values to use in a histogram
calculation to be automatically determined. The minimum and maximum data
points will be used.
Query Response
CALCulate:AVERage?
[< count >[,<offset>
[,<step_size>]]]
Averages a specified number of measurements in the memory
buffer. The optional parameters are for averaging selected
values in the memory buffer.
<count> specifies the number of data points to calculate.
<offset> determines at which point the instrument will begin
averaging stored values.
<step_size> determines the number of measurements the
instrument will skip before taking a value to be averaged.
NOTE: In order to specify <step size>, you must first enter <count> and <offset> values>. If you
do not specify a <count> value, then the instrument will use the most recent <count> as the
default.
CALCulate:LIMit:ENVelope[:
DATA]?
Returns the <threshold1> and <threshold2> values
CALCulate:LIMit:FCOunt? Performs a limit test on the current available data and returns
the number of data points that failed a limit test.
NOTE: You must send a CALC:limit:upper, lower, or envelope command before this query.
CALCulate:LIMit:REPort[:
DATA]?
Returns the <memory_index> and <failed_value> values
collected in the most recent CALCulate:LIMit:...[:DATA]
command.
Query Response