Filter
Top Products
SCPI Commands for the SurePatht Modules
VX4101A MultiPaq Instrument User Manual
3–265
H VX4350 General Purpose Switching module: <NR1>
The range of this field is 1 to 64. It specifies one of 64 relays on the
VX4350.
H VX4351 40-Channel, 10 Amp, SPST Switch Module: <NRI>
The range of this field is 1 to 40, specifying one of the 40 relays on the
module. If the module is placed in two-wire mode, then the range of the field
becomes 1 to 20, specifying one of the twenty relay pairs available on the
module.
H VX4380 Matrix: <NR1> ! <NR1> ! <NR1>
The range of the first <NR1> field is 1 to 4. It specifies the row of a relay in
one of the sections of the VX4380. The range of the second <NR1> field is 1
to 16. It specifies the column of a relay in one of the sections of the VX4380.
The range of the third <NR1> field is 1 to 4. It specifies a section of the
VX4380. A one dimensional <channel_spec> may also be used to specify a
channel on a VX4380 Module. The one dimensional <channel_spec> is
given by the formula:
( (section – 1 ) × 64 ) + ( ( row – 1 ) × 16 ) + column
where variables “section” and “row” and “column” are section, row, and
column numbers specified in a three-dimensional <channel_spec>.
<channel_list>
A list of channel numbers on one or more relay modules.
The limits on the channel numbers in a <channel_list> depend on the model
number of the relay module(s) specified in the <channel_list>.
The syntax of a <channel_list> is shown in the following diagram:
<NR1>
! :
<NR1>
!
<channel_range>
<channel_list>
( @ (
,
) )<module_name>
<channel_range>
,